You can receive the atomic clock signal manually. In Normal time display, press
and hold the 【 Down/°C/°F/RCC】over 2 seconds to receive the atomic
clock signal manually.
The tower icon is flashing and will start atomic clock reception.
When the atomic clock signal is received successfully, the time and date will be
updated.
8
5 ATOMIC CLOCK RECEPTION
5.1 MANUAL RCC RECEPTION
8). Put the weather station away from interference, such as electronic devices
(TV, computer, microwave, radio, etc.)
9). When the atomic clock signal is received successfully , the time and date will
be updated.
10). Allow the outdoor sensors and weather to sit together for 15 minutes to
establish a strong connection.
11). Do not press button for 15 minutes.
12). After 15 minutes, place the sensors in a shaded outdoor location.
• The weather station automatically begins search WWVB signal and update the
time every day at 1:00am，2:00am，3:00am，4:00am，5:00am.
• The Atomic Time tower icon will flash while searching and will be solid when
it has connected.
10
To Next Page
Loading...
