Description of operation
- [00 0 0 0000] : Country Option Code
- Option 1 ~ 4 : Detail Country Option 1~4(Refer Adjust spec sheet)
- Auto ADC : Adjust ADC in PC or AV by SVC Remote Control
- Audio Setup : Only Engineering. Don't setting
- ETC : ETC Setting
II_SW(0 : Auto adjustment & DDC Communication in factory side/
1 : EDID Read and Write and shipping condiition)
Write Protect (0 : EDID write / 1 : EDID write protection)
- Full Reset : Factory Reset
- 200X. 0X. 0X : Firmware update date
- PAL-XX : inchi
- LOC Ver : Video & Audio Decoder Firmware Version
- Sedna Ver : Scaler Firmware Version
How to enter SVC Menu
1. Push "IN-Start" key in SVC remote controller.
2. Push "Menu" key in remote controller over 5 seconds the while pushing "Menu" key of Local button.
(If SVC OSD appear, remove the finger on "Menu" key in remote controller first of all)
XX
To Next Page
Loading...
