LG 16T90Q Series - Using Tablet PC Mode; Connectivity and Power; Connecting LAN Adapter; Power Connection

4Using Tablet PC Mode
ENGLISH
Using Tablet PC Mode
Unfold the notebook and rotate the LCD as shown in the picture to use it as a
tablet PC.
!
CAUTION
• When packing or moving the product, close the LCD panel to
protect it.
• Be careful not to pinch your fingers between the PC main
body and the LCD panel.
• Do not rotate the LCD panel with excessive force. This may
damage the hinge connecting the PC body and the LCD panel.
• In tablet PC mode, the keyboard faces the bottom of the
product. Clean around the product to prevent the keyboard
and PC body from being damaged.
NOTE
•
When rotating the product, the screen is rotated vertically or horizontally
according to the current screen angle.
•
To leave standby mode (LCD off), press the power button or sleep button.
•
For details on tablet PC mode, refer to the LG Easy Guide of the LG PC Manuals.
Connecting LAN Adapter
1 Connect the LAN adapter to the USB-C™ port on the PC.
• The USB-C™ port can be used without having to
differentiate between the top and bottom sides.
2 Connect the network cable (LAN) to the LAN adapter.
3 Check if you can connect to the Internet properly.
Power Connection
The AC adapter is used to power and charge the PC.
•
Do not use any other AC adapter than the one that was provided when you
purchased this product.
•
The power cable and AC adapter may differ depending on your country or region.
1 Connect an end of the cable to the AC adapter
and the other end to a power outlet.
• The AC adapter can be used from 100 V to 240 V.
2 Connect the AC adapter jack to the PC USB-C™ port.
• Ensure that the power jack linked to the AC adapter
and product is connected firmly.