LG 19M35A

Questions and Answers:

L
Latoya HopkinsJul 26, 2025
How to fix no image on LG 19M35A?
- T
  Tony BrownJul 26, 2025
  If no image appears on your LG Monitor, ensure the power cord is properly connected to the outlet and that the monitor is turned on by pressing the Power button. Adjust the brightness and contrast settings. If the monitor is in power saving mode, try moving the mouse or pressing a key on the keyboard. Also, ensure your PC is turned on. If a 'No-Signal' message appears, it indicates the signal from your PC is out of the monitor's frequency range; refer to the 'Specifications' section to configure your display. Note that the monitor enters DPM mode if it's on 'No-Signal' for 5 minutes.
V
Valerie RosarioJul 31, 2025
What to do if display image is incorrect on LG 19M35A Monitor?
- A
  Adriana WilliamsAug 1, 2025
  If the display image on your LG Monitor is incorrect, press the AUTO button to automatically adjust the display image to the ideal setting. Also, check the display settings in your computer's Control Panel to ensure the resolution is set to the recommended value and the color setting is higher than 24 bits (true color).
Z
zrogersAug 5, 2025
What to do if LG 19M35A is unrecognized?
- S
  Sheryl ParksAug 5, 2025
  If your LG Monitor is unrecognized and shows a Plug&Play (VESA DDC) message, install the display driver from the CD or diskette that came with your monitor. Also, make sure that your video card supports the Plug&Play function.
M
Matthew WhitakerAug 10, 2025
Why is the screen color mono or abnormal on my LG 19M35A?
- C
  corey50Aug 10, 2025
  If the screen color on your LG Monitor is mono or abnormal, check if the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, ensure that the video card is properly inserted in its slot. Finally, verify that the color setting is set higher than 24 bits (true color) in the Control Panel settings.
B
bsalasAug 15, 2025
Why does my LG Monitor screen blink?
- D
  Denise HaydenAug 15, 2025
  If the screen of your LG Monitor blinks, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
D
Denise ReynoldsAug 20, 2025
How to unlock OSD on LG 19M35A Monitor?
- E
  Elizabeth WilliamsAug 21, 2025
  To unlock the OSD controls on your LG Monitor when the “OSD LOCKED” message appears, push the MENU button for several seconds until the message “OSD UNLOCKED” appears.

LG 19M35A Specifications

General

3D	No
Aspect ratio	16:9
Display surface	-
Display diagonal	18.5 \
Display resolution	1366 x 768 pixels
Viewing angle, vertical	65 °
Contrast ratio (dynamic)	500000:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	90 °
Display brightness (typical)	200 cd/m²
Supported graphics resolutions	1366 x 768
HDMI ports quantity	0
Product color	Black
Tilt angle range	3 - 20 °
Panel mounting interface	75 x 75 mm
AC input voltage	100 - 240 V
Power consumption (standby)	- W
Power consumption (typical)	13 W
Power consumption (PowerSave)	0.3 W
Package weight	3100 g

Weight and Dimensions

Depth (with stand)	185 mm
Height (with stand)	372 mm
Weight (with stand)	2100 g
Depth (without stand)	98 mm
Width (without stand)	441 mm
Height (without stand)	278 mm
Weight (without stand)	1800 g