To Next PageTo Next PageHow to fix an LG 19M38H Monitor when no image appears?
If no image appears on your LG Monitor, here are a few things to try: * Ensure the power cord is properly connected to the power outlet. * Press the Power button to turn on the monitor. * If the display is in power saving mode, move the mouse or press any key on the keyboard. * Make sure your PC is turned on. * Verify the signal cable between the PC and the monitor is properly connected.
Why is my LG 19M38H screen blinking?
If your LG Monitor screen is blinking, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
Why is there horizontal noise appearing on my LG Monitor?
If you observe horizontal noise or unclear characters on your LG Monitor, try these steps: 1. Press the AUTO button to automatically adjust the display image. 2. Go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution. 3. Alternatively, adjust the display image to the ideal setting. 4. Ensure the color setting is higher than 24 bits (true color).
What to do if the screen color on my LG Monitor is mono or abnormal?
If your LG Monitor's screen color is mono or appears abnormal, consider the following: * Check the signal cable is properly connected, and use a screwdriver to tighten it if necessary. * Ensure the video card is correctly inserted in its slot. * Set the color setting higher than 24 bits (true color) via Control Panel ? Settings.
Why are vertical bars or stripes visible on my LG 19M38H Monitor screen?
If you notice vertical bars or stripes on the background of your LG Monitor's screen, press the AUTO button to automatically adjust the display image to the ideal setting.
How to fix LG 19M38H when no image appears?
If no image appears on your LG Monitor, there are several things you can check: * Ensure the power cord is properly connected to the power outlet. * Press the Power button to turn on the monitor. * If the display is in power saving mode, move the mouse or press any key on the keyboard. * Make sure your PC is turned on. * Verify the signal cable between the PC and the monitor is securely connected.
What to do if the display image is incorrect on my LG 19M38H Monitor?
If the display image on your LG Monitor is incorrect, try the following: 1. Press the AUTO button to automatically adjust the display image to the ideal setting. 2. Check Control Panel ? Display ? Settings and adjust the display to the recommended resolution, or adjust the display image to the ideal setting. Ensure the color setting is higher than 24 bits (true color).
How to correct the display position on my LG 19M38H?
If the display position on your LG Monitor is incorrect, press the AUTO button to automatically adjust your display image to the ideal setting.
How to unlock OSD on LG 19M38H?
If you see an "OSD LOCKED" message on your LG Monitor, you can unlock the OSD controls by pushing the MENU button for several seconds until the message "OSD UNLOCKED" appears.
What to do if my LG 19M38H shows 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found'?
If you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on your LG Monitor: * Ensure you install the display driver. * Also, verify that your video card supports the Plug&Play function.
General| Screen Size | 18.5 inches |
|---|---|
| Resolution | 1366 x 768 |
| Panel Type | TN |
| Brightness | 200 cd/m² |
| Response Time | 5 ms |
| Aspect Ratio | 16:9 |
| Viewing Angle (Horizontal) | 90° |
| Viewing Angle (Vertical) | 65° |
| Connectivity | VGA |
| Contrast Ratio | 600:1 |
