LG 19MB35D - User Manual

Questions and Answers

S
Scott RobbinsAug 14, 2025
What to do if I can't release the stand base on my LG 19MB35D Monitor?
- M
  Maria GreeneAug 14, 2025
  If you are having trouble releasing the stand base on your LG Monitor, even when the locking knob is in the release position, try pushing the indicated knob down and then attempt the release again.
M
Megan CollinsAug 17, 2025
How to fix LG Monitor when no image appears?
- R
  Rachel RamirezAug 17, 2025
  If no image appears on your LG Monitor, ensure the power cord is properly connected to the outlet and that you've pressed the power button. Also, adjust the brightness and contrast settings. If the display is in power saving mode, try moving the mouse or pressing a key on the keyboard. Make sure your PC is turned on. This issue can also occur if the signal from the PC is out of the display's frequency range. If the monitor is on "No-Signal" for 5 minutes, it will enter DPM mode.
I
isandersAug 21, 2025
How to stop my LG 19MB35D screen from blinking?
- K
  Kristina JohnsonAug 21, 2025
  If your LG Monitor screen is blinking, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
L
lindasmithAug 25, 2025
What to do if the screen color is mono or abnormal on my LG Monitor?
- L
  Levi WareAug 25, 2025
  If the screen color on your LG Monitor is mono or abnormal, first check that the signal cable is properly connected, tightening it with a screwdriver if necessary. Next, ensure the video card is correctly inserted in its slot. Finally, go to Control Panel ? Settings and set the color setting higher than 24 bits (true color).
E
edward61Aug 27, 2025
How to fix horizontal noise or unclear characters on LG 19MB35D?
- M
  mcdonaldtimothyAug 28, 2025
  To resolve horizontal noise or unclear characters on your LG Monitor, first press the AUTO button to automatically adjust the display image. If the issue persists, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution. You may also need to set the color setting higher than 24 bits (true color).
W
William ThompsonAug 30, 2025
How to fix vertical bars or stripes on LG 19MB35D Monitor screen?
- W
  wernernathanAug 31, 2025
  If you see vertical bars or stripes on the screen background of your LG Monitor, press the AUTO button to automatically adjust your display image to the ideal setting.
J
johnsonmelanieSep 3, 2025
What to do if I see an 'OSD LOCKED' message on my LG Monitor?
- M
  michelleharperSep 3, 2025
  If you see an 'OSD LOCKED' message on your LG Monitor, you can unlock the OSD controls by pushing the MENU button for several seconds until the message 'OSD UNLOCKED' appears.
M
matamichaelSep 6, 2025
Why is the display position incorrect on my LG 19MB35D?
- B
  bbarnettSep 6, 2025
  If the display position is incorrect on your LG Monitor, press the AUTO button to automatically adjust your display image to the ideal setting.
U
usmithSep 10, 2025
What does 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' mean on LG Monitor and how to fix it?
- D
  Daniel MillerSep 10, 2025
  If you see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on your LG Monitor, install the display driver from the CD (or diskette) that came with your display. Also, verify that your video card supports the Plug&Play function.

This document is an owner's manual for an LG LED LCD Monitor, specifically covering models 19MB35D, 22MB35D, and 24MB35D. It provides comprehensive instructions for assembling, operating, customizing, and troubleshooting the monitor.

Function Description

The LG LED LCD Monitor serves as a display unit for personal computers, offering a visual interface for various computing tasks. It supports both analog (D-SUB) and digital (DVI-D) video input signals, making it compatible with a wide range of PCs. The monitor is designed to be user-friendly, featuring Plug & Play functionality, which allows a connected PC to recognize the device automatically without extensive configuration. It also includes a "Self Image Setting" function that automatically adjusts display settings for optimal viewing when the monitor is first connected or when input signals change (supported in Analog Mode). An "AUTO" function is available to improve resolution in cases of blurry screens, blurred letters, screen flicker, or tilted screens.

Usage Features

The monitor offers several features to enhance the user experience:

Assembly and Setup: The manual details how to unpack the monitor, identify all included parts (such as the power cord, D-SUB cable, DVI-D cable, stand body, and stand base), and assemble the stand. It provides clear instructions for attaching and detaching the stand base, ensuring proper setup.
Mounting Options: Users can mount the monitor on a table or a wall. For table mounting, it advises maintaining a 100 mm clearance from the wall for ventilation and provides instructions on adjusting the monitor's tilt angle from +20 to -5 degrees for optimal viewing comfort. For wall mounting, it specifies VESA compatibility and recommends using authorized LG wall mounts and screws, emphasizing safety precautions.
Connectivity: The monitor supports D-SUB and DVI-D connections to a PC. Instructions are provided for connecting the appropriate signal cables and tightening screws clockwise for a secure connection. It also notes that if two input signals are connected, the user can select between D-SUB and DVI-D.
On-Screen Display (OSD) Menu: The monitor features an intuitive OSD menu for customizing various settings. Users can navigate the menu using buttons located on the bottom of the monitor.
Customization Settings:
- Picture Settings: Adjustments can be made for Brightness, Contrast, and Sharpness. A "Response Time" setting is available for specific models (19MB35D, 22MB35D, 24MB35D) to optimize display for fast-moving pictures. "Wide/Original" settings allow switching between full-screen mode or maintaining the original input image signal ratio.
- Color Settings: Users can customize Gamma, Color Temperature (Warm, Medium, Cool, Custom RGB levels), and Six Color settings (Hue and Saturation for Red, Green, Blue, Cyan, Magenta, Yellow) for precise color control. A "Color Reset" option restores factory default color settings.
- Display Settings: Options for Horizontal and Vertical position, Clock, and Phase are available to minimize vertical bars or stripes, improve clarity, and sharpen images.
- Other Settings: Language selection, Power Indicator control (On/Off), and Off Time Setting (to automatically switch off the monitor after a chosen period) are also provided.
Reader Mode: This feature adjusts the screen to display content like paper, enhancing eye comfort. Two modes, Reader 1 (best for newspapers) and Reader 2 (best for cartoons), are available, along with an option to turn Reader Mode off. When Reader Mode is active, Picture Mode automatically switches to Custom, and SMART ENERGY SAVING is turned off.
SMART ENERGY SAVING: This function conserves energy by using a luminance compensation algorithm. Users can select High, Low, or Off settings. The manual notes that saving data depends on the panel, and monitor luminance may change based on the selected option.
Proper Posture Guide: The manual includes a visual guide on maintaining proper posture while using the monitor, advising users to adjust the monitor's location and their posture to view images at an optimal angle and avoid reflecting light. It also suggests keeping hands gently on the keyboard with arms bent at the elbows and horizontally outstretched.

Maintenance Features

The manual provides troubleshooting tips to address common issues:

No Image Appears: Instructions include checking power cord connection, power indicator status, and adjusting brightness/contrast. It also advises moving the mouse or pressing a keyboard key if the display is in power saving mode, and turning on the PC.
"OUT OF RANGE" or "NO SIGNAL" Message: Users are guided to configure their display settings according to the monitor's specifications if an "OUT OF RANGE" message appears. For "NO SIGNAL," it notes that the monitor will go into DPM mode after 5 minutes.
"OSD LOCKED" Message: The manual explains how to lock and unlock OSD controls by pressing and holding the MENU button for several seconds.
Incorrect Display Image: For issues like incorrect display position, vertical bars/stripes, or unclear characters, the manual recommends pressing the AUTO button to automatically adjust the display image to the ideal setting. It also suggests checking Control Panel > Display > Settings to adjust resolution and color depth.
Mono or Abnormal Screen Color: Troubleshooting steps include checking signal cable connection, ensuring the video card is properly inserted, and setting color depth higher than 24 bits (true color) in Control Panel > Settings.
Screen Blinks: It advises checking if the screen is set to interlace mode and changing it to the recommended resolution.
"Unrecognized monitor, Plug&Play (VESA DDC) monitor found" Message: The manual instructs users to install the display driver from the provided CD or LG's website and verify if the video card supports Plug&Play.

The manual also includes important cautions, such as not using unapproved accessories, unplugging the power cord before moving the monitor to prevent electric shock, and avoiding pressing the screen with fingers for extended periods to prevent temporary distortion or image burn. It recommends using a screensaver to prevent image burn from fixed images.