2 Operating
Operating 9
Operating
2
Charging the speaker
Charging with the AC adapter
This speaker uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet.
Operating time is approx. 22 hours. It is based
on what fully charged the battery, continuous
playback using 50 % volume level and turning
off mood light and equalizer functions.
It may vary depending on the battery status and
operational conditions.
,
Note
Only use the AC adapter supplied with this
device. Do not use a power supply from another
device or manufacturer. If you do not use this
adapter, charging is unavailable or charging time
may differ. And it may cause damage to the
device and void your warranty.
>
Caution
Checking the charging status
When speaker's battery is charging, you can check
the charging status by Battery LED.
LED Description
Green Off
Battery is fully charged.
Red
Battery is charging.
y
If you listen to the music while charging, it will
take longer to charge.
y
When the speaker is not charging by
overheating, Battery LED turn on red and
amber alternately. And charging is stopped.
y
When the speaker’s battery is fully charged,
the Battery LED turn on green for 15 seconds
and then off.
,
Note
To Next Page
Loading...
Need help?
General
