What to do if my LG Monitor says 'OUT OF RANGE'?
If your LG Monitor displays an "OUT OF RANGE" message, it means the signal from your PC's video card is outside the monitor's supported horizontal or vertical frequency range. Refer to the 'Specifications' section of the manual to reconfigure your display settings accordingly.
How to stop the screen from blinking on my LG 20EN33T Monitor?
To stop the screen from blinking on your LG Monitor, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
How to fix an LG 20EN33T when no image appears?
If no image appears on your LG Monitor, ensure the power cord is properly connected to the outlet and that the monitor is turned on by pressing the Power button. Also, adjust the brightness and contrast settings. If the monitor is in power saving mode, try moving the mouse or pressing a key. Finally, check if your PC is turned on.
How to resolve horizontal noise on LG 20EN33T?
If you see horizontal noise or characters that aren't clear on your LG monitor, first, press the AUTO button to automatically adjust the display image. If that doesn't work, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution, or fine-tune the display image settings. Also, ensure that your color setting is higher than 24 bits (true color).
Why is my LG 20EN33T Monitor screen blinking?
If your LG Monitor screen is blinking, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
What to do if no image appears on my LG 20EN33T Monitor?
If no image is appearing on your LG Monitor, make sure the power cord is properly connected to the power outlet. Also, press the Power button and adjust the brightness and contrast. If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard. Ensure the PC is turned on. Check the 'Specifications' section of this manual and configure your display again. Note that when the monitor is on 'No-Signal' for 5 minutes, it enters DPM mode.
How to fix incorrect display image on LG Monitor?
To correct an incorrect display image on your LG Monitor, repeatedly press the AUTO button to automatically adjust the image to the ideal setting. Also, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution, ensuring the color setting is higher than 24 bits (true color).
Why is my LG Monitor screen color abnormal?
If the screen color on your LG monitor appears mono or abnormal, check whether the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, ensure that the video card is correctly inserted in its slot. Finally, set the color setting to higher than 24 bits (true color) in Control Panel settings.
How to fix 'Unrecognized monitor' message on LG 20EN33T Monitor?
If your LG monitor displays the message "Unrecognized monitor, Plug&Play (VESA DDC) monitor found", install the display driver from the CD or diskette that came with your monitor. You can also download the driver from the LG website. Make sure that your video card supports Plug&Play function.
How to correct the display position on my LG Monitor?
If the display position on your LG monitor is incorrect, press the AUTO button to automatically adjust the display image to the ideal setting.
To Next Page
General
