To Next PageTo Next PageWhat to do if my LG 20MP38AB Monitor displays "Unrecognized monitor, Plug&Play (VESA DDC) monitor found"?
If you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on your LG Monitor, be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Also, make sure to check if the video card supports Plug&Play function.
What to do if my LG 20MP38AB shows 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message?
Be sure to install the display driver from the LG website. Also, make sure to check if the video card supports Plug&Play function.
Why does my LG Monitor display no image?
If your LG Monitor is not displaying an image, ensure the power cord is properly connected to the power outlet and the monitor is turned on by pressing the Power button. If it's in power saving mode, move the mouse or press any key on the keyboard. Also, check if the PC is turned on. If the signal from the PC is out of range, see the 'Specifications' section of this manual and configure your display again. Finally, verify the signal cable between the PC and the monitor is correctly connected.
What to do if the LG Monitor screen blinks?
If your LG monitor screen is blinking, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
Why does my LG 20MP38AB show no image?
If your LG monitor displays no image, several factors could be at play. First, ensure the power cord is securely connected to the power outlet and that the monitor is powered on by pressing the Power button. If the monitor is in power saving mode, try moving the mouse or pressing any key on the keyboard. Also, verify that your PC is turned on. If the signal cable between the PC and the monitor is missing or disconnected, check the cable and reconnect it. If you see a message indicating the signal from the PC is out of range, consult the 'Specifications' section of this manual and configure your display accordingly.
Why does my LG Monitor have no image?
If your LG monitor displays no image, ensure the power cord is properly connected to the outlet and that the power button is pressed. If the monitor is in power saving mode, move the mouse or press a key. Also, verify that the PC is turned on and the cable is correctly connected. If a message appears indicating the signal is out of range, consult the 'Specifications' section of the manual to reconfigure the display.
How to fix an LG 20MP38AB Monitor when no image appears?
If no image appears on your LG Monitor, ensure the power cord is properly connected to the outlet and that you've pressed the power button. If the monitor is in power saving mode, move the mouse or press a key on the keyboard. Also, verify that the PC is turned on and the signal cable is securely connected. If the PC's video card signal is out of range, consult the 'Specifications' section of the manual to reconfigure your display.
Why is my LG Monitor screen flickering?
If the screen of your LG monitor is flickering, and the resolution is set to HDMI 1080i 60/50 Hz, this could be the cause. Try changing the resolution to the recommended setting of 1080P to resolve the flickering.
General| Screen Size | 19.5 inches |
|---|---|
| Resolution | 1600 x 900 |
| Panel Type | TN |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Response Time | 5 ms |
| Contrast Ratio (Typical) | 1000:1 |
| Power Consumption (Typical) | 18W |
| Power Consumption (Standby) | 0.3 W |
| Connectivity | D-Sub |
| Contrast Ratio (Dynamic) | 5000000:1 |
| Color Depth | 16.7 million |
| Input Ports | D-Sub |
| Power Consumption | 18 W (Typical) |
