LG 22LE5300 Series - Antenna Connection; Vcr Setup

EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
38
VCR SETUP
Antenna Connection
D
IO
ERVICE)
D
IO R
2
1
R
L R
S-VIDEO VIDEO
AUDIO
OUTPUT
SWITCH
ANT IN
ANT OUT
ANTENNA
IN
CABLE IN
Wall Jack
Antenna
1. How to connect
1
Connect the RF antenna out socket
of the VCR to the ANTENNA/CABLE
IN socket on the TV.
2
Connect the antenna cable to the RF
antenna in socket of the VCR.
2. How to use
ᯫ
Set VCR output switch to 3 or 4 and
then tune TV to the same channel num-
ber.
ᯫ
Insert a video tape into the VCR and
press PLAY on the VCR (Refer to the
VCR owner’s manual).
1
2
Composite (RCA) Connection
G
B IN (PC)
AUDIO IN
RGB/DVI
D
VI)
OPTICAL
DIGITAL
AUDIO OUT
COMPONENT IN
RS-232C IN
( CONTROL&SERVICE)
1 2
VIDEO
AUDIO
YP B P R
L R
AV IN
VIDEO AUDIO
L(MONO)
R
S-VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
L R
VIDEO
AUDIO
AN
1. How to connect
1
Connect the AUDIO/VIDEO jacks between TV
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
2. How to use
ᯫ
Insert a video tape into the VCR and press PLAY
on the VCR.
(
Refer to the VCR owner’s manual.
)
ᯫ
Select the AV1 input source on the TV using the
INPUT button on the remote control.
ᯫ
If connected to AV IN 2, select AV2 input source on
the TV.
!
NOTE
► If you have a mono VCR, connect the audio cable
from the VCR to the AUDIO L/MONO jack of the TV.
1