8
ENGLISH
USING THE JOYSTICK BUTTON
(Image shown may differ from your TV.)
You can operate the TV by pressing the button or
moving the joystick left, right, up, or down.
Joystick Button
Basic functions
When the TV is turned off, place
your finger on the joystick button,
press it once, and release it.
Power On
When the TV is turned on, place
your finger on the joystick button,
press it once for a few seconds,
and release it.
Power Off
Place your finger on the joystick
button and move it left or right to
adjust the volume level.
Volume Control
Place your finger on the joystick
button and move it up or down to
adjust the channel.
Channels
Control
NOTE
Move the joystick button up, down. left. or right.
Be careful not to press it. If you press it first, you
cannot adjust the volume or scroll through the
channels.
Adjusting the menu
When the TV is turned on, press the joystick button
one time. You can adjust the menu items moving
the joystick button up, down, left, or right.
Turns the power off.
Accesses the main menu. (Depending upon model)
Clears on-screen displays and returns to TV viewing.
Changes the input source.
MOUNTING ON A TABLE
(Image shown may differ from your TV.)
1 Lift and tilt the TV into its upright position on a table.
- Leave a 100 mm (4 inches) (minimum) space
from the wall for proper ventilation.
100 mm
100 mm
100 mm
100 mm
(4 inches)
2 Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources of heat, as
this may result in fire or other damage.
Using the Kensington Security
System (optional)
(Depending upon model)
The Kensington security system connector is located
at the rear of the TV. For more information of
installation and using, refer to the manual provided
with the Kensington security system or visit
http://
www.kensington.com.
Connect the Kensington
security system cable between the TV and a table.
NOTE
The Kensington security system is optional. You can
obtain additional accessories from your local dealer..
MOUNTING ON A WALL
An optional wall mount can be used with your LG
Television. Consult with your local dealer for a wall
mount that supports the VESA standard used by your
TV model. Carefully attach the wall mount bracket
at the rear of the TV. Install the wall mount bracket
on a solid wall perpendicular to the floor. If you are
attaching the TV to other building materials, please
contact qualified personnel to install the wall mount.
Detailed instructions will be included with the wall
mount. We recommend that you use an LG brand
wall mount. When you do not use LG’s wall mount
bracket, use a wall mount bracket where the device is
adequately secured to the wall with enough space to
allow connectivity to external devices.
To Next Page
Loading...
