LG 24MT45V - Technical Specifications; Application Scope and General Specs; Test Methods and Formats

- 6 -
LGE Internal Use Only
Copyright © LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
1. Application Range
This spec sheet is applied all of the TV used LD41A chassis.
2. Specication
Each part is tested as below without special appointment
1) Temperature : 25 ˚C ± 5 ˚C (77 ˚F ± 9 ˚F),
CST : 40 ˚C ± 5 ˚C
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage : Standard input voltage
(100 V - 240 V ~, 50 / 60 Hz)
· Standard Voltage of each products is marked by models
4) Specication and performance of each parts are followed
each drawing and specication by part number in accord-
ance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3.Test method
1) Performance : LGE TV test method followed
2) Demanded other specication
- Safety : CE,IEC specication
- EMC : CE,IEC specication
NOTE : Specications and others are subject to change without notice for improvement.
4. General specication
No Item Specication Remarks
1 Market Colombia(PAL/DTMB)
2 Broadcasting system NTSC
DVB-T2
3 Receiving system Analog : Upper Heterodyne
Digital : DVB-T2
DTMB : DMB-T and ADTB-T
4 Interface RF / Composite / Component(CVBS) / HDMI /
D-Sub /USB / Audio In