Table of contents
4 Safety precautions
6 Licenses
6 Open source software notice information
6 Preparing
7 Lifting and moving the TV
7 Setting up the TV
7 Using the joystick button
7 Basic functions
8 Adjusting the menu
8 Mounting on a table
8 Adjusting the angle of the TV to suit view
8 Using the kensington security system
9 Mounting on a wall
9 Connections (Notifications)
10 Antenna connection
10 Other connections
10 - Connecting to a PC
11 Remote control
12 Settings
14 To see web manual
15 Maintenance
15 Cleaning your TV
15 - Screen, frame, cabinet, and stand
15 - Power cord
15 Preventing “Image burn” or “Burn-in” on your TV screen
15 Troubleshooting
16 Specifications
19 Environmental information
Service
Unplug the monitor from the wall outlet and refer servicing to
qualified service personnel when :
• The power cord or plug is damaged or frayed.
• Liquid has been spilled into the monitor.
• The monitor has been exposed to rain or water.
• The monitor does not operate normally following the operating
instructions. Adjust only those controls that are covered in the
operating instructions. An improper adjustment of other controls
may result in damage and often requires extensive work by a
qualified technician to restore the monitor to normal operation.
• The monitor has been dropped or the cabinet has been damaged.
• The monitor exhibits a distinct change in performance.
• Snapping or popping from the monitor is continuous or frequent
while the monitor is operating. It is normal for some monitors to
make occasional sounds when being turned on or off, or when
changing video modes.
Do not attempt to service the monitor yourself, as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
To Next Page
Loading...
Need help?
General
