To Next PageTo Next PageWhy is my LG Monitor screen flickering and how can I fix it?
If the screen of your LG Monitor is flickering, and the selected resolution is HDMI 1080i 60/50 Hz, try changing the resolution to the recommended resolution of 1080P.
How to fix no image on my LG 27BK750Y?
If no image appears on your LG Monitor, first ensure the power cord is properly connected to the power outlet and that you've pressed the Power button. Also, this message might appear when the signal from your PC's video card is out of the display's horizontal or vertical frequency range. Refer to the 'Specifications' section of the manual to configure your display settings. Finally, check and reconnect the cable. If the monitor is in DPM mode with the power LED off, press the DC button twice to wake up the screen.
Why is the display image incorrect on my LG 27BK750Y Monitor and how to fix it?
If the display image on your LG Monitor appears incorrect, ensure the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, verify that the video card is correctly inserted in its slot. Set the color setting higher than 24 bits (true color) via Control Panel settings. Finally, check if the screen is set to interlace mode; if so, change it to the recommended resolution.
What to do if no image appears on my LG 27BK750Y Monitor?
If no image appears on your LG Monitor, ensure the power cord is properly connected to the power outlet and that you have pressed the Power button. Also, this issue can occur if the signal from the PC (video card) is out of the display's horizontal or vertical frequency range. Refer to the 'Specifications' section of the manual to configure your display. If the monitor displays 'NO SIGNAL' and enters DPM mode, it means the signal cable between the PC and the monitor is either missing or disconnected. Check the cable and reconnect it. If the monitor is in DPM with the power LED off, press the DC button twice to wake up the screen.
What to do if I see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on my LG Monitor?
If you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on your LG Monitor, be sure to install the display driver from the LG website: http://www.lg.com. Also, make sure to check if your video card supports the Plug&Play function.
How to unlock OSD controls on LG 27BK750Y Monitor?
You can unlock the OSD controls on your LG Monitor at any time by entering the OSD lock menu and changing the settings to 'off'.
What to do if my LG 27BK750Y shows an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message?
If your LG Monitor displays an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message, make sure to install the display driver from the LG website. Also, verify that your video card supports the Plug&Play function.
General| Screen Size | 27 inches |
|---|---|
| Panel Type | IPS |
| Refresh Rate | 75 Hz |
| Contrast Ratio | 1000:1 |
| Response Time | 5ms (GTG) |
| VESA Mount Compatible | Yes (100 x 100 mm) |
| Aspect Ratio | 16:9 |
| Color Gamut | sRGB 99% |
| VESA Mount | 100 x 100 mm |
| Ports | HDMI, DisplayPort |
| Viewing Angle | 178° |
| Resolution | 2560 x 1440 |
