To Next PageTo Next PageWhat to do if nothing is displayed on my LG Monitor screen?
If nothing is displayed on the LG Monitor screen, first, ensure the power cord is correctly plugged into the power outlet. Also, check the signal cable between the PC and the monitor to make sure it is properly connected. Finally, verify that the signals transferred from the PC are within the horizontal or vertical frequency range specified in the Product Specification section.
What to do if images are displayed without sound on my LG 27MP500 Monitor?
If images are displayed without sound on your LG Monitor, ensure that the headphone port connections are properly made. Also, try increasing the volume using the joystick. Finally, set the audio output of the PC to the monitor you are using. Note that the settings may differ depending on the operating system.
What to do if the LG 27MP500 displays nothing due to frequency range issues?
Signals transferred from your PC (graphics card) might be outside the horizontal or vertical frequency range supported by the monitor. Refer to the Product Specification section of this manual to set the appropriate frequency.
Why is there no sound from the headphone port on my LG 27MP500?
Make sure the headphone port connections are properly connected. Also, try increasing the volume using the joystick. Finally, set the audio output of your PC to the monitor you are using. The settings may vary depending on your operating system.
How to fix LG Monitor when nothing is displayed on the screen?
If nothing is displayed on your LG Monitor screen, first ensure the power cord is correctly plugged into the power outlet. Also, check the signal cable between your PC and the monitor to make sure it's properly connected. If the issue persists, it could be due to the signals transferred from the PC being out of the monitor's frequency range. Refer to the Product Specification section of the manual to set the appropriate frequency.
What to do if images are displayed without sound on LG 27MP500 Monitor?
If images are displayed without sound on your LG Monitor, first make sure that the headphone port connections are properly made. Then, try increasing the volume using the joystick. Finally, ensure that the audio output of your PC is set to the monitor you are using. Note that the settings may differ depending on your operating system.
What to do if there is no sound from the headphone port of LG 27MP500?
If you are not getting any sound from the headphone port on your LG Monitor, first, make sure that the headphone port connections are properly made. Then, try increasing the volume using the joystick. Finally, ensure that the audio output of your PC is set to the monitor you are using. Note that the settings may differ depending on the operating system (OS) you are using.
Why is my LG 27MP500 Monitor screen display unstable and shaky?
An unstable or shaky screen display, or shadow trails on images displayed on your LG Monitor, can occur if the selected resolution is HDMI 1080i 60/50 Hz (interlaced). Change the resolution to 1080p or the recommended resolution. It can also happen if the graphics card is not set to the recommended resolution. This may result in blurred text, a dimmed screen, a truncated display area, or misalignment of the display. Setting methods vary depending on the computer or operating system.
How to prevent image sticking on my LG 27MP500?
To prevent image sticking on your LG Monitor, avoid displaying a still image for extended periods, as this can damage the screen. Use a screensaver to extend the monitor's lifespan.
Why does my LG 27MP500 show 'Unrecognized monitor, Plug and Play (VESA DDC) monitor found' message?
If you see an 'Unrecognized monitor, Plug and Play (VESA DDC) monitor found' message on your LG Monitor, be sure to install the display driver from the LG website: http://www.lg.com. Also, make sure to check if the graphics card supports Plug and Play function.
General| Screen Size | 27 inches |
|---|---|
| Panel Type | IPS |
| Refresh Rate | 75 Hz |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Aspect Ratio | 16:9 |
| VESA Mount | 100 x 100 mm |
| Viewing Angle | 178° (H) / 178° (V) |
| Color Gamut | sRGB 99% |
| Resolution | 1920 x 1080 |
| Response Time | 5 ms |
| Ports | HDMI, D-Sub |
| Power Consumption | 22W (Typical) |
