Need help?Do you have a question about the LG 27UL500 and is the answer not in the manual?
General| 3D | - |
|---|---|
| Pixel pitch | 0.1554 x 0.1554 mm |
| Screen shape | Flat |
| Display surface | Matt |
| Display diagonal | 27 \ |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Maximum refresh rate | - Hz |
| sRGB coverage (typical) | 98 % |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 1.073 billion colors |
| Display brightness (typical) | 300 cd/m² |
| Supported graphics resolutions | 3840 x 2160 |
| High Dynamic Range (HDR) supported | Yes |
| Cables included | DisplayPort, HDMI |
| Package type | Box |
| Package depth | 146 mm |
| Package width | 700 mm |
| Package height | 446 mm |
| Package weight | 7100 g |
| Panel mounting interface | 100 x 100 mm |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.3 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (PowerSave) | - W |
| Product color | Silver |
| Market positioning | Gaming |
| DisplayPort version | 1.4 |
| VGA (D-Sub) ports quantity | 0 |
Weight and Dimensions| Depth (with stand) | 209.4 mm |
|---|---|
| Height (with stand) | 460 mm |
| Weight (with stand) | 5100 g |
| Depth (without stand) | 74.1 mm |
| Width (without stand) | 622.6 mm |
| Height (without stand) | 371 mm |
| Weight (without stand) | 4600 g |
General safety guidelines for servicing the monitor, preventing electrical shock.
Procedure for measuring AC leakage current to ensure user safety.
Method for checking continuity of exposed metallic parts to chassis.
Detailed specifications for the monitor's general features and connectivity.
Timing parameters for various resolutions via DisplayPort.
Timing parameters for various resolutions via HDMI.
Details of Extended Display Identification Data (EDID) for the monitor.
Scope of the manual and designation of adjustment procedures.
Steps for checking the Main PCB, including SMT and function tests.
Procedure for writing HDCP 2.2 and 1.4 keys into flash memory.
Process for writing the serial number into EDID data.
Method to verify HDCP key functionality by checking screen color.
Instructions for setting and checking automatic standby time.
Procedures for factory calibration including Gamma and Color Temperature.
Procedure to check white balance specifications before factory calibration.
Steps to check HDR mode functionality and OSD display.
Procedure to check DisplayPort Monitor (DPM) operation.
Steps for factory reset and configuring outgoing settings.
Details on I2C communication, start commands, and command forms.
Hexadecimal commands for screen adjustments like gain, brightness, and color mode.
Commands for writing data to EEPROM, including signal table and command set.
Commands for reading data from EEPROM, including signal table and command set.
Schematic showing the main components and their interconnections.
Visual representation of components and their assembly order.
List of tools needed for product disassembly.
Basic steps and guidelines for disassembling the product.
Flowchart for diagnosing and resolving power-related issues.
Flowchart for diagnosing and resolving screen display issues.
Troubleshooting steps for no video signal via HDMI.
Troubleshooting steps for no video signal via DisplayPort.
Troubleshooting steps for no audio output.
To Next Page
