27
Contacts in Your Phone’s Memory
The Basics of Storing Contacts Entries
1 Enter the phone number you want to save (up to 48 digits).
2 Touch Save and select either Add New Contact or Update Existing on the pop-
up screen.
3 Touch a Phone Label.
Mobile 1/ Home 1/ Office 1/ Mobile 2/ Fax/ Home 2/ Office 2/ Email 1/ Email 2
NOTE: Use Existing Entry to add another phone number to a contact
already stored in memory.
4 Touch the Name field and enter a name for the contact (up to 32 characters).
Then touch Done and Save. A confirmation message is displayed briefly.
Phone Numbers With Pauses
When you call automated systems such as voicemail or credit billing numbers, you
often have to enter a series of numbers to navigate through the system. Instead
of entering these numbers by hand, you can store the numbers in your Contacts
separated by special pause characters (W, P). There are two different types of pauses
you can use when storing a number:
Wait (W)
The phone stops dialing until you touch Release to advance to the next number.
Pause (P)
The phone waits 2 seconds before sending the next string of digits.
To Next Page
Loading...
