55
ENGLISH
The audio function does not work.
Picture OK &
No sound
• Press the VOL or VOLUME button.
• Sound muted? Press MUTE button.
• Try another channel. The problem may be with the broadcast.
• Are the audio cables installed properly?
• Check whether the TV Speaker is On in the SOUND menu.
Unusual sound
from inside the
product
• A change in ambient humidity or temperature may result in an unusual
noise when the product is turned on or off and does not indicate a fault with
the product.
No output from one
of the speakers
• Adjust Balance in menu option.
Screen color is
unstable or single
color
• Check the signal cable.
• Reinstall the PC video card.
The signal is out of
range.
There is a problem in PC mode.
(Only PC mode applied)
• Adjust resolution, horizontal frequency, or vertical frequency.
• Check it whether the signal cable is connected or loose.
• Check the input source.
Vertical bar or
stripe on back-
ground &
Horizontal Noise &
Incorrect position
• Work the Auto configure or adjust clock, phase, or H/V position.
• The specifications shown above may be changed without prior notice for quality improvement.
Product Specifications
Product Specifications
32LB1R
**
: AC 100-240V~ 50/60Hz 1.5A / 145W
37LB1R
**
: AC 100-240V~ 50/60Hz 2.0A / 180W
42LB1R
**
: AC 100-240V~ 50/60Hz 2.5A / 240W
32LB1R
**
: 911.4mm x 259.0mm x 596.0mm
35.9inches x 10.2inches x 23.5inches
37LB1R
**
: 1046.0mm x 296.0mm x 690.0mm
41.2inches x 11.7inches x 27.2inches
42LB1R
**
: 1175.0mm x 300.0mm x 768.0mm
46.3inches x 11.8inches x 30.2inches
32LB1R
**
: 22.6kg (49.8lbs)
37LB1R
**
: 31.6kg (69.7lbs)
42LB1R
**
: 41.4kg (91.3lbs)
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’
VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
75 Ω
Power Requirement/
Power Consumption
Dimensions
(Width x Depth x Height)
Weight (Net)
Television System
Programme Coverage
External Antenna Impedance
To Next Page
Loading...
