- 17 -
10.3 b_LAN Main board Check
10.3.1 Overview
It is LNET RF modem & FTG card
10.3.2 Equipment
1) b_LAN Checker: UTC-1000 (with Cable accessory)
2) Computer(for test result monitoring)
3) Connection JIG
10.3.3 Equipnent connection map & b_LAN Check
4) Check
=========================================
1. Setting Procedure
1) Setting JIG
(1) Connect UTC-1000 Equipment to JIG device as a like left picture
- Connection Line:
UTC-1000 TOP1 <--> Game port(RJ21)
-> TV-LINK CFG (Phone Jack)
UTC-1000 TOP2 <--> JIG 11pin Connection
UTC-1000 RF1 <--> b_LAN RF IN
UTC-1000 LAN <--> PC LAN Port
2. Working procedure
1) Connection
UTC-1000 LAN <--> PC LAN Port
UTC-1000 TOP1 <--> Game port(RJ21)
-> TV-LINK CFG (Phone Jack)
UTC-1000 RF1 <--> b_LAN RF IN
2) Power on JIG
3) Test Start
UTC-1000 TOP2 <--> JIG 11pin Connection
4) Checking b-LAN MAC Address
Check whether it is same their address numbers or not between B-LAN Label and on the pc address numbers.
LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes