- 18 -
* Checking JIG contents
1. Check whether displaying all “Pass” or not at the number 3.4.6.7.9 contents of UTC-1000 on the PC
2. Check “Version 6.0” of the 1. b_LAN Application version
3. Check whether it is same their address numbers or not between B-LAN Label and 2. MAC Address on the pc.
11. Serial number download.
Connect Bar Code scan equipment and TV set by RS-232C cable.
1) E2PROM Data Write
2) E2PROM Data Read
LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
To Next Page
Loading...
