57
EXTERNAL EQUIPMENT SETUP
ꔛ
This feature requires an always-on
broadband internet connection.
ꔛ
You do not need to connect to a PC
to use this function.
ꔛ
If Network Setting is not working,
check your network conditions. Check
the LAN cable and make sure your
router has DHCP turned on if you
wish to use the Auto Setting.
ꔛ
If the Network Setting is not com-
pleted, network may not operate nor-
mally.
ꔛ
IP Auto Setting: Select it if there is a
DHCP server on the local area net-
work (LAN) via wired connection, the
TV will automatically be allocated an
IP address. If you’re using a broad-
band router or broadband modem
that has a DHCP (Dynamic Host
Configuration Protocol) server func-
tion. The IP address will automati-
cally be determined.
ꔛ
IP Manual Setting: Select it if there is
no DHCP server on the network and
you want to set the IP address manu-
ally.
Wired Network Setup
1
Select NETWORK.
2
Select Network Setting.
3
Select Wired.
4
If you already set Network Setting:
Select Resetting. The new connection
settings resets the current network
settings.
5
Select IP Auto Setting or IP Manual
Setting.
12
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
0
9
WXYZ
When Selecting IP Manual Setting:
IP addresses will need to be input
manually.
6
Select Enter.
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
NETWORK
ꔂ Move ꔉ Enter
• Network Setting : Wired
• Network Status : Internet is connected
• Legal Notice
IP Auto Setting
If you already set the
Network Setting
IP Manual Setting
Network Type
Wired network is recommended
Wired
Wireless
Network Setting
Select the IP setting mode.
IP Mode
◀ IP Auto Setting ▶
ꔈIP Address 255 . 255 . 0 . 0
ꔈSubnet Mask 255 . 255 . 0 . 0
ꔈGateway 255 . 255 . 0 . 0
ꔈDNS Server 255 . 255 . 0 . 0
ꕉ Previous
Enter
ꕯ Exit
Network Setting
Insert the IP address.
IP Mode
◀ IP Manual Setting ▶
ꔈIP Address 255 . 255 . 0 . 0
ꔈSubnet Mask 255 . 255 . 0 . 0
ꔈGateway 255 . 255 . 0 . 0
ꔈDNS Server 255 . 255 . 0 . 0
ꕉ Previous
Enter
ꕯ Exit
Network Setting
Network connecting
Setting Test Close
Previous setting value exists. Do
you want to connect with the
previous setting?
Enter
Resetting
ꕯ Exit
ꔉ Next
TV
Appeared when wired and
wireless are simultaneously
connected.
To Next Page
Loading...
