61
EXTERNAL EQUIPMENT SETUP
If you want to connect the AP (Access Point) or router with PIN, use this feature.
If your access point or wireless router that supports PIN or WPS (Wi-Fi Protected Setup), it’s available
to use your access point or wireless router within 120 counts. You do not need to know the access
point name (SSID: Service Set Identifier) and security code of your access point or wireless router.
When a security code is already set
PIN (Personal Identification Number)
Simple setting (WPS-button mode)
ꔛ
PIN number is the unique 8 digit number
of the dongle.
Connecting with PIN mode
Insert PIN number at the AP webpage and
press ‘Connect’ button.
PIN NUBMER : 12345670
Connect
ꕉ Previous
For more information, check the AP manual.
ꕯ Exit
ꔉ Next
Simple setting (WPS-button mode)
Press PBC Mode button of AP and press ‘Connect’ button.
Connect
ꕉ Previous
Caution: Check if PBC mode button is available for your AP.
ꕯ Exit
ꔉ Next
Selecting AP
ꕉ Previous ꕯ Exit
ꔉ Next
Select AP you want to connect.
Page 1/1
IPTIME
iptime
ASW
Network1
ꔅ Connecting with PIN mode
Access Point
Search
2
Connect the acccess point with PIN
mode.
4
Select Connect.
RED
1
Repeat step 1-6 on P.60.
3
You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
Select the wireless network setting type.
Select the wireless network setting type.
Setting from the AP list
Simple setting (WPS-button mode)
Setting Ad-hoc network
ꕉ Previous ꕯ Exit
ꔉ Next
1
Repeat step 1-4 on P.60.
3
Select Connect.
2
Select Simple setting (WPS-
button mode).
5
Repeat step 4-5 on P.57.
4
Repeat step 4-5 on P.57.
To Next Page
Loading...
