GB-73
PICTURE CONTROL
ENERGY SAVING
It reduces the TV’s power consumption.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode.
When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished.
1
Select Auto, Off, Minimum, Medium,
Maximum or Screen Off.
When selecting Screen off, TV turned off after 3 seconds.
If you adjust “Energy Saving-Auto, Minimum, Medium, Maximum”, Backlight feature will not work.
You can also adjust this feature by selecting Energy Saving button on the remote control.
When selecting Auto, Backlight is automatically adjusted through intelligent sensor according to the surrounding condition
when intelligent sensor is in the TV.
■
■
■
■
• Press the MENU button to return to normal TV viewing.
• Press the RETURN button to return to the previous screen.
To Next Page
Loading...
