LGE Internal Use OnlyCopyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 6 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
4. Module general specification
Item Specification Remark
Display Screen Device 32” wide Color Display Module LCD
Aspect Ratio 16:9
LCD Module 32” TFT LCD HD LG2000/3000(HD)
MAKER : 32”- CMO, LGD, Shap
Operating Environment Temp. : 0~50 deg LGE SPEC
Humidity : 20~90%(CMO),10~90%(LGD), 0~95%(Sharp)
Storage Environment Temp. : -20~60 deg(CMO/LGD), -25~60 deg(Sharp)
Humidity : 10~90%(CMO/LGD), 0~95%(Sharp)
Input Voltage 100 - 240V~, 50/60Hz
Power Consumption Power on (Green) LCD(Module) + Backlight(Lamp)
CMO(HD) Typ:110, Max:120
Sharp(HD) Typ:116.8, Max:153.6
LGD(HD) Typ:87.3, Max:96.6
Module Size CMO(HD) 760(H) x 450(V) x 47.4(D)
Sharp(HD) 760(H) x 450(V) x 50.1(D)
LGD(HD) 760(H) x 450(V) x 48.0(D)
Pixel Pitch CMO(HD) 0.17025(H) x 0.51075 (V)
Sharp(HD) 0.51075(H) x 0.51075(V)
LGD(HD) 0.17025(H) x 0.51075 (V)
Back Light CMO(HD) 16 CCFL
Sharp(HD) 12 CCFL
LGD(HD) 12 EEFL
Display Colors 16.7M
Coating 3H, AG
1. Application range
This specification sheet is applied to the LCD TV used LD84A
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage(100-240V~, 50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC specification
- EMC: CE, IEC
Model Market Appliance
32LG2000-ZA EU(PAL market) Safety : IEC/EN60065
EMI : EN55013
EMS : EN55020
To Next Page
Loading...
