LG 32LG6000 - Page 27

- 27 -
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
8. Weltrend uCOM GPIO
uCOM I2C for EyeQ2 ControlUCOM_SDA_3.3VI/OC5/P15/TXD1
L : Micom TX, H : Chaplin Degug TxUART_SELI/OC4/P14/RXD1
--I/OC3/AD3
--I/OC2/AD2
KEY ADC Input2KEY2ADCC1/AD1
KEY ADC Input1KEY1ADCC0/AD0
I2C with FLI10620SDA2_3.3VI2C
B6/SSDA
I2C with FLI10620SCL2_3.3VI2CB5/SSCL
MICOM EX EEPROM I2CEEPROM SDAI2CB4/P05
MICOM EX EEPROM I2CEEPROM SCLI2CB3/P04
IR Signal InputIRI/OB2/IR
HDMI CECCEC_0I/OB1/IRQ3/CEC
--I/OB0/IRQ2
For EEPROM ProgrammingD_SUB_SDAI2CDSDA1
For EEPROM ProgrammingD_SUB_SCLI2C
DSCL1
H : MuteMUTE_LINE_DTVI/O
A5/DSDA2
H : MuteMUTE_LINEI/O
A4/DSCL2
Active High1.2V_DOUGLAS_ENI/OA3/PWM7/P03
Active High1.8V_DOUGLAS_ENI/O
A2/PWM6/P02
HDMI Switch IC Ch. SelectionHDMI_SEL2I/OA1/PWM5/P01
HDMI Switch IC Ch. SelectionHDMI_SEL1I/O
A0/PWM4/P00
CommentDiscriptionAssignmentTypeGPIO
9. Weltrend uCOM GPIO map
Active Low Reset signal OUTRESETI/OE7/VIN1
T-con B/D 12V power supply CTRLPANEL_VCC_ENI/OE6/VIN2
uCOM I2C for EyeQ2 ControlUCOM_SCL_3.3VI/O
E5/P07
H : Inverter On to PSUINV_CTRLI/O
E4/LPWM/P06
LED Sub A°Øssy Standby 3.3V on/off CTRLLED_IR_3.3V_ST_On/Off_CTRLI/O
E3/PWM3
-I/O
E2/PWM2
LG7000 ready-I/OE1/PWM1
-PWME0/PWM0
For MICOM Programming DebuggingUCOM_RXRXD7/RXD2
For MICOM Programming DebuggingUCOM_TXTXD6/TXD2
H : PSU Relay OnRL_ON/PWR_ON/OFFI/OD5/P13/AD7
Active High3.3V_ENI/OD4/P12/AD6
H : Aus model L : EP4 HModel SELI/O
D3/P11/AD5
H : PDP L : LCDLCD/PDP SELI/O
D2/P10/AD4
--I/OD1/HIN2
Active LowAUDIO_MUTEI/OD0/HIN1
.PANEL_ERROR_DETI/OC7/P17/IRQ1
H : AC Power ON, L:AC Power OFF detectionAC_DETI/O
C6/P16/IRQ0
CommentDiscriptionAssignmentTypeGPIO