To Next PageTo Next Page
Need help?Do you have a question about the LG 32LH2000-ZA and is the answer not in the manual?
General safety warnings and component identification for safe servicing.
Recommendations for safe servicing procedures and equipment usage.
Procedures for checking AC leakage current (Cold and Hot).
General guidelines for safe TV servicing operations.
Precautions for handling sensitive electronic components to prevent damage.
Best practices for soldering electronic components safely and effectively.
Steps for removing and replacing integrated circuits and transistors.
Procedures for replacing diodes, fuses, and conventional resistors.
Procedures for repairing damaged PCB traces with jumper wires.
Defines the scope of the manual and conditions for testing.
Standards for evaluation and technical details of electrical components.
Details on color, brightness, contrast, and viewing angle characteristics.
Supported resolutions and frequencies for component video input.
Details for PC video input resolutions and refresh rates.
Details for HDMI video input in DTV and PC modes.
Order of adjustments and main PCB checks, including boot file download.
Steps for updating TV software via USB connection.
Steps for Analog-to-Digital Converter calibration.
Verification of display and audio output functionality.
Preparing for adjustments and writing EDID data for displays.
Information on Extended Display Identification Data.
Steps for automatic EDID and model data download.
Steps for manual EDID and model data download.
Setting the TV for final shipment and operation.
Process for downloading model and serial information.
Safety warnings related to component identification in the exploded view.
Schematic of main block and memory ICs like NAND Flash.
Schematics for power detection and MCU boot strapping.
Schematics for CVBS, Component, and DSUB inputs.
Specifics on the main processor/controller IC (LGE3368A).
Schematic for DDR2 memory modules.
Further connections and details for the main processor.
Schematics for analog audio, PC audio, and USB ports.
Schematic for the serial communication port.
Schematic for the CI slot and related control signals.
Schematic for the serial buffer for transport stream data.
Schematics for front and rear HDMI port connections.
Schematic for Consumer Electronics Control functionality.
Schematic for the earphone audio amplifier.
Details on speaker output connections and circuitry.
Schematics related to the main power supply unit.
Schematics for panel power and voltage regulation circuits.
Schematics for SCART audio connections.
Circuit for muting SCART audio signals.
Schematics for the analog and digital tuner modules.
Details on tuner frequency control and RF AGC.
Schematics for LVDS signal connections to the panel.
Schematics for infrared receiver and LED indicators.
High-level overview of TV components and connections.
Block diagrams of tuner, memory, and main processing units.
Block diagrams of input/output interfaces and audio circuits.
Diagram for 37-inch GIP panel control.
Schematics for T-Con, DC/DC converters, and level shifters.
Diagram for 42/47-inch panel control.
Schematics for T-Con, DC/DC converters, and LDOs.
Steps for no video with normal audio.
Important notes before performing repairs.
Steps for diagnosing no video and no audio issues.
Steps for diagnosing picture freezing or breaking.
Steps for diagnosing color display issues.
Steps for bars, image persistence, or light spots.
Troubleshooting external input color errors.
Steps for troubleshooting when the TV does not power on.
Steps for issues with unexpected power cycling.
Descriptions of various power-off status codes.
Steps for diagnosing no audio with video present.
Steps for distorted or intermittent audio.
Troubleshooting remote control issues.
Troubleshooting physical button issues.
Troubleshooting issues with connected devices.
Steps for diagnosing electronic circuit noise.
Steps for diagnosing mechanical noise.
Troubleshooting physical damage to the module.
Troubleshooting damage to cabinet, remote, and stand.
Verifying voltage levels at specific points for boot failure.
Recommended component replacements for boot failure.
Verifying power connector and voltage inputs for boot issues.
Recommended component replacements for boot failures.
Diagnosing issues related to voltage and LVDS cables.
Verifying power connector and LVDS cable integrity.
Troubleshooting RF cable and voltage levels for digital TV.
Troubleshooting RF cable and voltage levels for analog TV.
Verifying signal format and SCART cable for AV1 CVBS.
Verifying signal format and SCART cable for AV1 RGB.
Verifying signal format and SCART cable for AV2.
Verifying signal format and CVBS cable for AV3.
Verifying AV1 spec and SCART cable for no video out.
Verifying AV2 spec and SCART cable for no video out.
Verifying component signal format and cable.
Verifying RGB signal format and cable.
Verifying RGB signal format and cable for color issues.
Verifying HDMI signal format and EDID settings.
Verifying HDMI signal format and specific port checks.
Troubleshooting speaker and cable connections for audio.
Verifying digital TV video signal for audio troubleshooting.
Verifying analog TV video signal and SIF for audio.
Verifying SCART cable and sound signal for AV1.
Verifying SCART cable and sound signal for AV2.
Verifying CVBS cable and sound signal for AV3.
Verifying CVBS cable and sound signal for component.
Verifying PC audio cable and sound signal.
Verifying HDMI cable and EDID settings for audio.
Verifying analog TV audio for AV1 output issues.
Verifying speaker audio for AV2 output issues.
Verifying speaker audio and headphone cable.
Verifying speaker audio and SPDIF cable.
Verifying USB support and connector integrity.
Verifying IR sensor wafer and connector.
Verifying IR IC voltage and connector.
Verifying IR sensor wafer and connector for intelligent sensor.
General
