17
ENGENGLISH
ASSEMBLING AND PREPARING
4
Attaching the shelf stand
Image shown may differ from your TV.
- You can use the shelf stand by putting STB (Set
top box).
2
3
1
LN515*
M4 x L8
2EA
Stand Base
Stand Body
CAUTION
Make sure that the screws are inserted
correctly and fastened securely. (If they
are not fastened securely enough, the
Stand may tilt after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
5
M4 x L8
1EA
P5 x L69.5
3EA
Wall Plate
NOTE
To install wall mount anchor, you can
refer to p.18.
To Next Page
Loading...
