40
ENG
ENGLISH
CUSTOMIZING TV SETTING
This feature may not be applied based on
country broadcasting circumstance.
Stereo/Dual Reception
When a programme is selected, the sound
information for the station appears with the
programme number and station name.
Press I/II button to select the Multi Audio
menu.
Broadcast On Screen Display
Mono
Stereo
Dual
MONO
STEREO
DUAL I , DUAL II , DUAL I + II
NICAM NICAM
Mono sound selection
If the stereo signal is weak in stereo recep-
tion, you can switch to mono. In mono recep-
tion, the clarity of sound is improved.
Language selection for dual language
broadcast
If a programme can be received in two lan-
guages (dual language), you can switch to
DUAL I, DUAL II or DUAL I+II.
DUAL I Sends the primary broadcast lan-
guage to the loudspeakers.
DUAL I I Sends the secondary broadcast
language to the loudspeakers.
DUAL I+I I Sends a separate language to
each loudspeaker.
Nicam Reception
If the TV is equipped with a receiver for NICAM
reception, high quality NICAM (Near Instantane-
ous Companding Audio Multiplex) digital sound
can be received.
Sound output can be selected according to the
type of broadcast received.
1 When NICAM mono is received, you can
select NICAM MONO or FM MONO.
2 When NICAM stereo is received, you can
select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM
MONO.
3 When NICAM dual is received, you can
select NICAM DUAL I, NICAM DUAL II or
NICAM DUAL I+II or FM MONO.
Speaker Sound Output Selection
In AV, Component, HDMI mode, you can select
output sound for the left and right loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent
to the left loudspeaker and audio signal
from audio R input is sent to the right
loudspeaker.
L+L: Audio signal from audio L input is sent
to left and right loudspeakers.
R+R: Audio signal from audio R input is sent
to left and right loudspeakers.
To Next Page
Loading...
