To Next PageTo Next Page
Need help?Do you have a question about the LG 32LS3590 and is the answer not in the manual?
General| Screen shape | Flat |
|---|---|
| Response time | - ms |
| Display diagonal | 32 \ |
| Display brightness | - cd/m² |
| Display resolution | 1366 x 768 pixels |
| Native aspect ratio | 16:9 |
| Native refresh rate | 50 Hz |
| LED backlighting type | Edge-LED |
| Supported video modes | 1080i, 1080p, 720p |
| Screen format adjustments | 4:3, 14:9, 16:9, Zoom |
| Supported graphics resolutions | 1366 x 768 |
| Motion interpolation technology | MCI (Motion Clarity Index) 100 |
| 3D | No |
| Annual energy consumption | 58 kWh |
| Product color | White |
| Panel mounting interface | 200 x 100 mm |
| Analog signal format system | - |
| Audio system | Dolby MS10 |
| RMS rated power | 10 W |
| Number of speakers | 2 |
| HDMI version | 1.4 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 1 |
| Consumer Electronics Control (CEC) | Anynet+ |
| Audio formats supported | AAC, AC3, LPCM, MP3 |
| Video formats supported | DIVX |
| Smart modes | Cinema, Game, Sports, Standard |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 40 W |
| Power consumption (standby) | 0.3 W |
| Cables included | AC |
| Package weight | 11800 g |
Weight and Dimensions| Depth (with stand) | 288.8 mm |
|---|---|
| Height (with stand) | 530 mm |
| Weight (with stand) | 9100 g |
| Depth (without stand) | 45.8 mm |
| Width (without stand) | 755 mm |
| Height (without stand) | 479 mm |
| Weight (without stand) | 8300 g |
General safety warnings and precautions for technicians.
Basic safety practices and use of isolation transformers.
Procedures for checking AC leakage current for safety.
General rules and precautions before starting service.
Precautions for handling sensitive electronic components.
Best practices and techniques for soldering electronic components.
Steps for replacing ICs, transistors, diodes, and resistors.
Methods for repairing damaged circuit board traces.
Defines the scope and conditions for product testing.
Outlines procedures for product performance and safety testing.
Details supported markets, DTV standards, and satellite compatibility.
Specifications for broadcast standards and receiving systems.
Information on various input and output ports.
Supported resolutions for component video input.
Supported resolutions for RGB video input.
Supported resolutions for HDMI video input.
Scope, equipment, and conditions for adjustments.
Procedures for checking the main circuit board.
Steps for downloading firmware via USB.
Steps for calibrating the Analog-to-Digital Converter.
Details on Extended Display Identification Data.
Verifying TV functions and preparing for assembly line adjustments.
Guidelines for auto-control, map, and manual white balance.
Procedures for EYE-Q, 3D, and IR emitter checks.
Final setup steps before shipping.
Steps for automated high voltage testing and parameters.
Method and notices for downloading model and serial data.
Setup and download process for MAC address and CI+ keys.
Network setup, inspection, and ping test procedures.
Visual representation of the TV's internal components and connections.
Detailed diagrams of the power board.
Diagrams detailing LVDS connector and signal flow.
Schematics illustrating DDR memory integration.
Diagrams for the SPI serial flash memory.
Diagrams for the Conditional Access Module interface.
Diagrams for the Ethernet port and associated circuitry.
Diagrams for IR receiver and LED control circuits.
Schematics for the TV's tuner components.
Diagrams for the satellite tuner LNB interface.
Schematics for the audio amplifier integrated circuit.
Diagrams for flash memory and HDCP protection.
Schematics for system power and interface configurations.
Diagrams for USB port protection components.
Diagrams for HDMI connections and Consumer Electronics Control.
Diagrams for component and SCART AV inputs.
Diagram for the 4-pin RS-232C serial port.
Diagram for the MSTAR debug interface connector.
Diagnostic steps for no video with normal audio.
Diagnostic steps for no video and no audio.
Steps for diagnosing picture break or freezing issues.
Steps for diagnosing tuning failures and picture issues.
Diagnostic steps for color display problems.
Steps for bars, image retention, and external color problems.
Diagnostic steps for when the TV does not power on.
Troubleshooting for unexpected power offs or auto-on/off.
Steps for diagnosing no sound with normal video.
Steps for fixing distorted, discontinuous, or noisy audio.
Troubleshooting remote control operation and local buttons.
Steps for issues recognizing connected devices via various inputs.
Diagnosing and resolving audio or physical noise issues.
Procedures for addressing cosmetic or physical damage to the TV.
