27
206-4340
Installer Menu (Cont.)
Installer Menu Items 000 through 071
Item Function Value Range Default Value Brief Description of Function
000 INSTALLER SEQ 0 – 3 0 Leave default set to 0.
001 POWER MANAGE 0 – 7 0
Selects the number of hours of inactivity allowed before the TV automatically
turns itself OFF. Set to 0 to disable Power Management.
002 AC ON 0 – 3, 16 – 19 0
Determines the status of the TV (ON, Instant ON enabled, etc.) when AC power
is applied. See detailed descriptions.
003 BAND/AFC 0 – 3 1 Selects the RF Tuning Band: 0=Broadcast, 1=Cable, 2=HRC, 3=IRC
004 STRT CHANNEL 0 – 127, 255 255
Channel tuned when the TV is turned ON. (Set to 255 to tune to channel
tuned before the TV was turned OFF.)
005 CHAN LOCK 0 / 1 0 If set to 1, cannot tune from current channel.
007 STRT VOLUME 0 – 63, 255 255
Volume level when the TV is turned ON. (Set to 255 to use volume level set
before the TV was turned OFF.)
008 MIN VOLUME 0 – 63 0 Sets the minimum allowable volume setting.
009 MAX VOLUME 0 – 63 63 Sets the maximum allowable volume setting.
010 MUTE DISABLE 0 / 1 0 Set to 1 to disable the Mute function.
015 SLEEP TIMER 0 / 1 1 Set to 1 to enable the Sleep Timer feature.
016 EN. TIMER 0 / 1 0 Set to 1 to enable On/Off timers.
017 ALARM 0 / 1 1 Set to 1 to enable the Alarm feature in the Function Menu.
020 FEATURE LEVEL 0, 16 – 24 0 Determines an additional IR code scheme to which the TV will respond.
021 V-CHIP 0 / 1 1 Set to 1 to enable V-Chip (Parental Control) functions.
022 MAX BLK HRS 0 – 99 12
Determines the maximum number of Parental Control blocking hours that can
be set in the Function Menu.
023 CAPTION LOCK 0 / 1 0 Set to 1 to retain the caption setting selected before the TV was turned OFF.
028 CH. OVERIDE 0 / 1 1
If set to 0, users can only tune to channels that are included in the PTC
Channel Map. See detailed descriptions.
029 REMAP AUX INPS 0 / 1 0 Set to 1 to remap the PTC’s direct tune channels for Aux inputs from 13x to 9x.
030 ACK MASK 0 / 1 0 If set to 1, enables the ACK feature of MPI.
031 POLL RATE 20 – 169 94 Selects the poll rate for MPI.
032 TIMING PULSE 186 – 227 207 Sets the baud rate for MPI.
035 HDMI1 ENABLE 0 – 2 1
Set to 0 to disable HDMI 1. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 1.
039 REAR AUX EN. 0 / 1 1 Set to 1 to enable the display panel AV input jack.
041 SIMPLINK EN 0 – 3 0 Determines the status of the SIMPLINK feature. See detailed descriptions.
042 AUTO INPUTS 0 – 255 0
Determines the Aux inputs for which auto-sensing is enabled. See detailed
descriptions.
046 STRT AUX SRCE 1, 3, 5, 7, 255 7 Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0).
047 AUX STATUS 0 / 1 0
Controls the MPI status channel response for Aux sources. Set to 1 for Aux
source to be reported as its channel number.
053 DIS. CH-TIME 0 / 1 0 Set to 1 to disable the TV’s native Channel-Time display.
069 EN. CH-T COL. 0 / 1 1 Set to 1 to enable custom color for MPI display characters.
070 FOR. CH-TIME 0 – 7 2 Chooses custom foreground color for MPI display characters.
071 BCK. CH-TIME 0 – 7 2 Chooses custom background color for MPI display characters.
To Next Page
Loading...
