28
206-4340
Installer Menu Items 073 through 122
Item Function Value Range Default Value Brief Description of Function
073 CH NOT AVBLE 0 / 1 0
If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL NOT
AVAILABLE” message is displayed if the user attempts to direct tune a channel
that is not included in the channel lineup.
075 REVERT CH 0 / 1 0
If set to 1 and loss of MPI communication occurs, the TV tunes to the
Start Channel.
078 UPN MSB 0 – 255 0 User programmable number, most significant byte.
079 UPN MSB-1 0 – 255 0 User programmable number, most significant byte - 1.
080 UPN MSB-2 0 – 255 0 User programmable number, most significant byte - 2.
081 UPN LSB 0 – 255 0 User programmable number, least significant byte.
082 CHKSM ERROR 0 / 1 1 Enforces rigid MPI checksum.
083 HANDSHK TIME 0 – 5 5 Relaxes MPI timing to be compatible with PC-based Windows-controlled systems.
084 PERMANENT BLK 0 / 1 0
Set to 1 to remove the blocking hours setting in the Function Menu for Parental
Control and make the block permanent.
088 EN NOISE MUTE 0 / 1 1 (Analog channels only) If set to 1, audio is muted if no signal is present.
090 KEY LOCK 0 / 1 0 If set to 1, all display panel button functions are locked. IR is still functional.
091 HDMI2 ENABLE 0 – 2 1
Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 2.
092 HDMI3 ENABLE 0 – 2 1
Set to 0 to disable HDMI 3. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 3.
093 RJP AVAILABLE 0, 1, 2, 5, 6 0
Set to 0 to disable. Set to 1, 2, 5, or 6 for HDMI or DVI Mode. See
detailed descriptions.
094 SAP MENU EN 0 / 1 1 Set to 1 to enable the SAP feature in the Function Menu.
096 DEF. ASP. RATIO 0 – 4 2 Selects the default aspect ratio. See detailed descriptions.
097 AUDIO OUTPUT 0 – 9
7
Set as required in accordance with external audio equipment connected to the
TV. See detailed descriptions.
098 PRO:CENTRIC 0 / 2
0
Set to 0 to disable the Pro:Centric application. Set to 2 for GEM (Java
Application) Mode.
099 BACK LIGHTING 1 – 202, 255 255 Sets the level of the TV picture back lighting. See detailed descriptions.
102 ATSC BAND 0 – 4 4 Selects the RF band used by the ATSC tuner. See detailed descriptions.
103 ATSC TUNE MODE 0 / 1 1 Set to 1 for Physical Channel tuning. Set to 0 for Virtual Channel tuning.
104 START MINOR CH 0 – 255 0 Selects the Minor Start Channel number. Set to 0 for analog (NTSC) channel.
106 ASP RATIO LOCK 0 / 1 0
Set to 0 to use the default aspect ratio each time the TV is turned ON. Set to 1
to retain the aspect ratio set before the TV was turned OFF.
107 BANNER SELECT 0 / 1 1 Selects the type of banner to display during channel change.
116 VIDEO MUTE EN 0 / 1 0
(Analog channels only) If set to 1, video mutes (blank screen) when no
signal is present.
117 FACT DEFAULT 0 / 1 0 Set to 1 to restore the factory default settings of all Installer Menu items.
118 POWER SAVINGS 1, 3, 7 3
Determines the powered status of the embedded b-LAN module and the GAME
CONTROL/MPI port. See detailed descriptions.
119 DATA CHANNEL
0 – 135, 253,
255
255
Set to 0 to disable. Set from 1 to 135 to match the RF channel number used
by the Pro:Centric server as its data channel. Set to 255 to use Auto Search
to find the Pro:Centric RF channel. See detailed descriptions.
121 UPDATE TIME HR 0 – 23, 128, 255 128 Sets the Wake For Update hour. See detailed descriptions.
122 UPDATE TIME MN 0 – 59 0 Sets the Wake For Update minute. See detailed descriptions.
Installer Menu (Cont.)
To Next Page
Loading...
