LG 32LW5500 - Page 17

Copyright 2011 LG Electronics.Inc.All right reserved.
Only for training and service purposes
C
LGE Internal Use Only- 16 -
1) Edge LED Models : LV5500/LV4500/LW6500/LW5500/LV2500
Aging time Cool Medium Warm
(Min) x y x y x y
GP3
269 273 285 293 313 329
1
0-2
279 288 295 308 319 338
2
3-5
278 286 294 306 318 336
3
6-9
277 285 293 305 317 335
4
10-19
276 283 292 303 316 333
5
20-35
274 280 290 300 314 330
6
36-49
272 277 288 297 312 327
7
50-79
271 275 287 295 311 325
8
80-149
270 274 286 294 310 324
9
Over 150
269 273 285 293 309 323
5.1.7 Local Dimming Inspection (Optional)
Edge LED models with local dimming
1) Press ‘TILT” key of the Adj. R/C and check moving patterns. The black bar patterns moves from
bottom to top.
If local dimming function does not work, a whole screen shows full white.
5.2 EYE-Q function check
Step 1) Turn on TV
Step 2) Press EYE key of Adj. R/C
Step 3) Cover the Eye Q II sensor on the front of the using your hand and wait for 6 seconds
Step 4) Confirm that R/G/B value is lower than 10 of the “Raw Data (Sensor data, Back light )” . If after
6 seconds, R/G/B value is not lower than 10, replace Eye Q II sensor
Step 5) Remove your hand from the Eye Q II sensor and wait for 6 seconds
Step 6) Confirm that “ok” pop up.
If change is not seen, replace Eye Q II sensor