LG 32LW5500 - Page 18

Copyright 2011 LG Electronics.Inc.All right reserved.
Only for training and service purposes
C
LGE Internal Use Only- 17 -
5.3 Option selection per country
5.3.1 Overview
▪ Option selection is only done for models in Non-USA North America due to rating
▪ Applied model: LC12C Chassis applied None USA model (CHINA ,HONGKONG)
5.3.2 Method
1) Press ADJ key on the Adj. R/C, then select Country Group Menu(TBD)
2) Depending on destination, select KR or US, then on the lower Country option, select US,
CA, MX. Selection is done using +,
- KEY(TBD)
5.4 Tool Option selection
▪ Method: Press Adj. key on the Adj. R/C, then select Tool option.
Model Tool 1 Tool 2 Tool 3 Tool 4 Tool 5 Tool 6
42LW6500-CA(HK)
33030 5461 3327 17577 47701 729
47LW6500-CA(HK)
33032 5461 3327 17577 47701 729
55LW6500-CA(HK)
33035 5461 3327 17577 47701 729
47LW6500-CA(CN)
33032 5461 3263 17569 48721 729
55LW6500-CA(CN)
33035 5461 3263 17569 48721 729
Model Tool 1 Tool 2 Tool 3 Tool 4 Tool 5 Tool 6
42LW5500-CA(CN)
33014 5461 3263 17569 15953 729
47LW5500-CA(CN)
33016 5461 3263 17569 15953 729
55LW5500-CA(CN)
33019 5461 3263 17569 15953 729
32LW5500-CA(HK)
33012 5461 3327 17577 14933 729
42LW5500-CA(HK)
33014 5461 3327 17577 14933 729
47LW5500-CA(HK)
33016 5461 3327 17577 14933 729
55LW5500-CA(HK)
33019 5461 3327 17577 14933 729
6. GND and Internal Pressure check
6.1 Method
1) GND & Internal Pressure auto-check preparation
- Check that Power Cord is fully inserted to the SET.
(If loose, re-insert)