What to do if audio function doesn't work on LG Digital Signage?
If the audio function does not work on your LG Digital Signage, check whether the audio cable is properly connected. Make sure the volume is adequately adjusted and the sound is set correctly. Try selecting the appropriate equalizer sound and re-adjusting the volume.
Why does 'Unknown Product' message appear on LG Digital Signage?
If the 'Unknown Product' message appears when your LG Digital Signage is connected, check if the Plug and Play function is supported by referring to the graphics card user manual.
What to do if LG 32SM5C Digital Signage operation does not work normally?
If the operation of your LG Digital Signage does not work normally, check if the Timer is set and review the power control settings. Note that a power interruption could also be the cause.
How to fix no image on LG Led display?
If no image appears on your LG LED display, start by ensuring the power cord is securely plugged into the power outlet. Also, inspect the signal cable connection. You may also press the INPUT menu on the remote control to verify the input signal.
What to do if audio function does not work on LG 32SM5C?
If the audio function is not working on your LG Digital Signage, start by checking the audio cable to ensure it is properly connected. Next, adjust the volume settings and confirm that the sound is set correctly. You may also want to select an appropriate equalizer sound setting.
Why does the screen image look abnormal on my LG 32SM5C Digital Signage?
If the screen image on your LG Digital Signage looks abnormal, verify that the graphics card resolution and frequency are supported by the product. If the frequency is out of range, set the resolution to the recommended setting in the Control Panel Display Setting menu. Also, ensure the correct input signal is connected to the appropriate signal port by using the corresponding signal cable.
How to fix no image on LG 32SM5C?
If no image appears on your LG Digital Signage display, first ensure the power cord is securely plugged into the outlet. Then, check the signal cable connection. Also, press the INPUT menu on the remote to verify the input signal. If the issue persists, your PC's graphics card signal might be outside the product's vertical or horizontal frequency range. Adjust the frequency range according to the specifications in the manual.
Why does my LG Digital Signage display 'Unknown Product'?
If the “Unknown Product” message appears when your LG Digital Signage is connected, check if the Plug and Play function is supported by referring to the graphics card user manual.
How to prevent after-image on LG 32SM5C?
If an after-image appears on your LG Digital Signage and you use a fixed image for a long time, it may damage the pixels. Use the screen-saver function. Note that this is normal for LCD screen products.
What to do if the screen image looks abnormal on LG Digital Signage?
If the screen image looks abnormal on your LG Digital Signage, check if the graphics card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the [Control Panel] ? [Display] ? [Setting] menu. (The settings may differ depending on your operating system.) Also, ensure the proper input signal is connected to the signal port; connect the signal cable that matches with the source input signal.
Essential safety measures for product installation to prevent hazards.
Guidelines for safe use of AC adapters and electrical power connections.
Safety guidelines for safely moving the product to prevent damage or injury.
General safety advice and best practices for operating the product.
Resolving problems related to no image, invalid format, or unknown product messages.
Details on LCD screen type, maximum resolution, and video signal support.
General| Display Size | 32 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 350 cd/m² |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 1200:1 |
| Viewing Angle (H x V) | 178° x 178° |
| Outputs | Audio Out |
| Operating Hours | 24/7 |
| Operating Temperature | 0°C to 40°C |
| Resolution | 1920 x 1080 |
| Response Time | 8 ms |
| Inputs | HDMI, USB |
| External Control | RS-232C, LAN |
| Orientation | Landscape, Portrait |
To Next Page
