How to prevent after-image on LG Digital Signage?
To prevent after-images on your LG Digital Signage: * If you use a fixed image for a long time, the pixels may be damaged. Use the screen-saver function. * When a dark image is displayed on the screen after an image with high contrast (black and white or gray), this may cause image sticking. This is normal for display products.
How to fix multi-touch not responding on LG 32TNF5J Digital Signage?
If multi-touch is not responding on your LG Digital Signage: * Make sure that you use a content that supports Multi-touch point. The content played (e.g. Flash Player, Paint, etc.) may not support Multi-touch points. * Remove the USB cable and connect it again in 10 seconds. * Run the content (e.g. Flash Player, Paint, etc.) again. * Restart your PC. * On the edge of the touch screen, multi-touch may work unstably. * If the interval between two touches is too short, a touch error may occur.
How to correct touch location on LG 32TNF5J?
If the location of a touch does not correspond to the touch coordinates on your LG Digital Signage, this may occur when the touch screen is not calibrated properly. Change your tablet PC settings.
How to fix PC BIOS configuration screen not displayed correctly on LG Digital Signage?
On some PCs, the BIOS configuration screen may not display correctly because the atypical aspect ratio is not supported before the graphics card driver is configured. To access the PC BIOS configuration screen, please connect a standard aspect ratio (4:3 or 16:9) monitor, then perform the BIOS configuration.
How to increase low sound on LG 32TNF5J Digital Signage?
To increase the sound if it is too low on your LG Digital Signage, adjust the volume of the product or external device.
Why won't my LG Digital Signage turn on?
If your LG Digital Signage isn't powering on, here are a few things to check: * Ensure the power cord is securely plugged into the power outlet. * If operating in below-zero temperatures, allow up to one hour for the enclosure to warm up internally. * For models with a circuit breaker, verify it's properly connected and the switch is set to the 'on' position (red). * Try disconnecting and reconnecting the AC adapter, after cleaning the contacting port. * When using POE, make sure that the LAN cable is not damaged. * Do not connect the AC adapter when using POE power.
What to do if the image is not displayed on LG 32TNF5J?
If the image is not displayed on your LG Digital Signage, check that the cable is properly connected between the panel and the Signage box.
How to fix horizontal noise or blurred characters on LG 32TNF5J Digital Signage?
To correct horizontal noise or blurred characters on your LG Digital Signage, if using a D-Sub analog signal, press the button on the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu.
How to fix stripes appearing in the background of LG Digital Signage?
To address stripes appearing in the background of your LG Digital Signage, if using a D-Sub analog signal, press the button on the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu.
How to fix no sound output on LG 32TNF5J?
If there is no sound output from your LG Digital Signage: * Ensure the audio cable is properly connected. * Adjust the volume of the product or external device. * Verify that the sound settings are configured correctly.
General| Brand | LG |
|---|---|
| Model | 32TNF5J |
| Category | Digital Signage |
| Language | English |
To Next Page
