29
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
In standby mode to turn TV on, press the
rr
/ I, INPUT or
PR
D
or
E
button on the TV or press the POWER, INPUT,
D/A, PR + or - or NUMBER button on the remote control
and the TV will switch on.
2
1
TURNING ON THE TV
Initializing setup
Note:
■
It will automatically disappear after approx. 30 seconds
unless a button is pressed.
■
Press the BACK button to change the current OSD to
the previous OSD.
■
"Home” mode is the optimal setting for home environ-
ments, and is the TV's default mode.
■
"In Store" mode is the optimal setting for store environ-
ments.“ If a user modifies image quality data, “In Store”
mode initializes the product to the image quality set by
us after a certain period of time.
■
The mode (Home, In Store) can be changed by execut-
ing Factory Reset in the OPTION menu.
If the OSD (On Screen Display) is displayed on the screen
after turning on the TV, you can adjust the Auto pro-
gramme tuning.
- When your TV is turned on, you will be able to use its features.
To Next Page
Loading...
