37
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Booster
Software Update
G
Diagnostics
Off
On
1
32
65
Software Update means software can be downloaded through
the digital terrestrial broadcasting system.
SOFTWARE UPDATE
(IN DIGITAL MODE ONLY)
Press the MENU button and then
D
or
E
button to
select the SETUP menu.
Press the
G
button and then
D
or
E
button to select
Software update.
Press the
G
button and then
D
or
E
button to select
On or Off.
• If you select On, a user confirm message box will be
displayed to notify that new software is found.
Press the EXIT button to return to normal TV viewing.
* When setting “Software Update”
Occasionally, a transmission of updated digital
software information will result in the OSD (On
Screen Display) on the TV screen.
Select YES using the
F
or
G
button.
The OSD will be disappeared on the TV screen, and
you can watch the current TV viewing.
G When you change the TV to standby mode using the
POWER button while watching the TV, it will be started
Software update.
G Turn on the TV in standby mode. The OSD is displayed
on the screen based on Software update
circumstances.
G After the Software update is complete, the System
takes about one minute to restart.
• Power to the TV must not be interrupted.
• The TV must not be switched off.
• The antenna must not be disconnected.
• After Software Update, you can confirm the updated
software version in Diagnostics menu.
- During Progress of a Software Update, please note the following:
1
2
3
4
To Next Page
Loading...
