LG 37LG50 Series - Page 94

92
1199.. AAuuttoo CCoonnffiigguurree ((CCoommmmaanndd 11:: jj,, CCoommmmaanndd 22 :: uu))
G To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
Data 01: To set
[j][u][ ][Set ID][ ][Data][Cr]
Ack
[u][ ][Set ID][ ][OK][Data][x]
APPENDIX
APPENDIX
1188.. AAbbnnoorrmmaall SSttaattee
((CCoommmmaanndd 11::kk,, CCoommmmaanndd 22 :: zz))
G To recognize an abnormal state.
Transmission
Data FF : Read
Data 00: Normal (Power on and signal exist)
01: No signal (Power on)
02: Turn the TV off by remote control
03: Turn the TV off by sleep time function
04: Turn the TV off by RS-232C function
05: 5V down
06: AC down
07: Turn the TV off by Fan Alarm function
08: Turn the TV off by Off time function
09: Turn the TV off by Auto sleep function
a: Turn the TV off by AV Board detect
* This function is “read only”.
[k][z][ ][Set ID][ ][Data][ ][Cr]
Ack
[z][ ][Set ID][ ][OK][Data][x]
**
RReeaall ddaattaa mmaappppiinngg 11
00 : Step 0
A : Step 10 (Set ID 10)
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64: Step 100
6E : Step 110
73 : Step 115
74 : Step 116
C7: Step 199
FE : Step 254
FF : Step 255
**
RReeaall ddaattaa mmaappppiinngg 22
00 : -40
01 : - 39
02 : -38
28 : 0
4E : +38
4F : +39
50 : +40
1166.. GGrreeeenn AAddjjuussttmmeenntt
((CCoommmmaanndd 11::kk,, CCoommmmaanndd 22 :: ww))
G To adjust green in colour temperature.
Transmission
Data Min : 00 ~ Max : 50H
*
Refer to ‘Real data mapping 2’. See page 92.
[k][w][ ][Set ID][ ][Data][Cr]
Ack
[w][ ][Set ID][ ][OK][Data][x]
1177.. BBlluuee AAddjjuussttmmeenntt
((CCoommmmaanndd 11::kk,, CCoommmmaanndd 22 :: $$))
G To adjust blue in colour temperature.
Transmission
Data Min : 00 ~ Max : 50H
*
Refer to ‘Real data mapping 2’. See page 92.
[k][$][ ][Set ID][ ][Data][Cr]
Ack
[$][ ][Set ID][ ][OK][Data][x]
Ack
[v][ ][Set ID][OK][ ][Data][x]
2200.. EEqquuaalliizzee (( CCoommmmaanndd 11:: jj,, CCoommmmaanndd 22 :: vv))
G To adjust equalize.
Transmission
Data 00 0: 120Hz
1: 200Hz
2: 500Hz
3: 1.2kHz
4: 3kHz
5: 7.5kHz
6: 12kHz
Data01 Min : 00 ~ Max : 1FH(0 ~ 31--> 32 Step)
*
Refer to ‘Real data mapping 1’. See page 92.
[j][v][ ][Set ID][ ][Data0][ ][Data1][Cr]