LG 39LN5150-TA - Editing Your Programme List; Selecting a Programme on the Programme List

22
ENG
ENGLISH
WATCHING TV
Assigning a station name
You can assign a station name with five characters to
each programme number.
1 Press SETTINGS and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Name.
4 Press the Navigation buttons to scroll to select
the position and make your choice of the second
character, and so on. You can use an the alphabet
A to Z, the number 0 to 9, +/ -, and blank and press
OK.
5 Press the OK to store it.
6 When you return to the previous menu, press
ꕣ
(BACK).
Fine Tuning
Normally fine tuning is only necessary if reception is poor.
1 Press SETTINGS and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Fine.
4 Press the Navigation buttons to fine tune for the best
picture and sound.
5 Press the OK to store it.
6 When you return to the previous menu, press
ꕣ
(BACK).
Editing your programme list
When a programme number is skipped, it means that you
will be unable to select it using P

button during TV
viewing.
If you wish to select the skipped programme, directly
enter the programme number with the NUMBER buttons
or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
1 Press SETTINGS and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to Programme
Edit.
3 Select To Set and edit programmes using the
following buttons.
Button Description
Red button
Deletes a programme.
Press the Red button twice. The
selected programme is deleted, all the
following programmes are shifted up
one position.
Yellow button
Moves a programme.
Press the Yellow button again to
release this function.
Blue button
Selects a programme number to be
skipped. Press the Blue button again
to release the skipped programme.
4 When you return to the previous menu, press
ꕣ
(BACK).
Selecting a programme on the pro-
gramme list
1 Press LIST to access the programme list.
2 Press the Navigation buttons to select to desired
programme and press OK.
3 When you return to the previous menu, press LIST.
NOTE

You may find some blue programmes. They have
been set up to be skipped by auto programming
or in the programme edit mode.

Some programmes with the programme number
shown in the programme list indicate there is no
station name assigned.