Why do afterimages appear on my LG LED TV?
Afterimages (ghosts) that appear when your LG LED TV is turned off may be due to pixels damaged from a fixed image displayed for an extended period. To prevent this, use a screen saver.
Why does my LG 39LN5300 display offset wrong?
To correct the display offset on your LG LED TV, adjust the position setting in the Picture menu. Also, verify that the video card resolution and frequency are supported by the TV. If the frequency is out of range, set the recommended resolution using the display settings on the external device.
Why does my LG 39LN5300 LED TV have poor reception on some channels?
If your LG LED TV has poor reception on certain channels, try switching to other channels to see if the problem persists, as there may be an issue with the broadcast. Also, the station signal might be weak, so try adjusting the antenna's direction. Finally, check for local interference from electrical appliances or power tools.
Why is there no sound from one speaker on my LG LED TV?
If there is no sound coming from one of the speakers on your LG LED TV, adjust the Balance in the menu option.
Why is my LG 39LN5300 LED TV remote not working?
If you cannot control your LG LED TV with the remote, make sure there are no obstacles between the remote and the TV. Also, verify that the remote control sensor on the TV is unobstructed. Finally, check that the batteries in the remote are working and correctly installed.
How to adjust brightness on dark LG LED TV screen?
If the screen of your LG LED TV appears extremely dark even when the power is on, adjust the brightness and contrast settings in the menu.
Why is the color quality poor on my LG 39LN5300 LED TV?
If the image on your LG LED TV is in black and white or the color quality is poor, try adjusting the color settings in the menu. Ensure that the TV is far enough away from other electronic devices that might cause interference. You might also want to try changing channels in case the issue is with the broadcast signal.
What does it mean when 'No Signal' appears on LG LED TV?
If you see a 'No Signal' message on your LG LED TV, first, check that the signal cable is correctly connected between the TV and any connected devices. Then, verify that you have selected the correct input source by pressing the INPUT button on your remote.
What to do if my LG 39LN5300 has no image and sound?
If your LG LED TV shows no image and produces no sound, first, ensure that the TV is turned on. Next, check that the power cord is properly connected to a working wall outlet. To verify the outlet's functionality, try connecting another device to it.
What to do if my LG LED TV remote is not working?
If you're unable to control your LG LED TV with the remote, start by checking the remote control sensor on the TV and try again. Ensure there are no obstructions between the remote and the TV. Lastly, check the batteries in the remote to confirm they are working and correctly installed.
Explains hazards like electric shock, fire, moisture, and proper usage.
Describes the meaning of warning symbols like lightning flash and exclamation mark.
Defines the severity of warning, caution, and note messages for user understanding.
Guidelines on protecting the power cord and using polarized/grounding plugs safely.
Instructions on using specified attachments, avoiding scratches, and proper cleaning.
Advises against exposing the product to rain, moisture, or liquids to prevent fire/shock.
Details grounding procedures and precautions against electric shock.
Explains precautions and guidelines for grounding outdoor TV antennas.
Steps for unpacking and preparing the TV for installation.
Guide on checking box contents and handling the product carefully.
Step-by-step guide with diagrams on how to attach the TV stand.
Guidance on placing the TV on a table with adequate space for ventilation.
Instructions on how to secure the TV to a table to prevent tilting.
Details VESA mount standards, screw sizes, and bracket models for wall mounting.
Instructions for connecting devices like receivers and DVD players via HDMI.
Details the purpose and function of each button on the remote control.
Further explanation of remote control buttons like PICTURE, SOUND, SETTINGS, etc.
Initial setup steps including language selection and basic settings.
Solutions for common issues like remote control, no image/sound, and external device connection.
Addresses problems like poor color, bars, lines, dark screens, and "No Signal".
Explains settings like Energy Saving, Picture Mode, and Aspect Ratio.
Details settings for Backlight, Contrast, Brightness, Sharpness, Color, and Tint.
Explains settings for Auto Volume, Clear Voice II, Balance, and Sound Modes.
General| Display diagonal | 38.5 \ |
|---|---|
| Native aspect ratio | 16:9 |
| Native refresh rate | 60 Hz |
| LED backlighting type | Direct-LED |
| Supported video modes | 1080i, 1080p, 720p |
| Screen format adjustments | 4:3, 16:9, Zoom |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| 3D | No |
| Storage temperature (T-T) | -20 - 60 °C |
| Tuner type | Analog & digital |
| Analog signal format system | NTSC |
| Digital signal format system | ATSC |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 1 |
| Consumer Electronics Control (CEC) | SimpLink |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | - |
| Smart modes | Cinema, Game, Sports, Standard |
| Product color | Black |
| Panel mounting interface | 200 x 200 mm |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 39 W |
| Sustainability certificates | ENERGY STAR |
| Cables included | AC |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Depth (with stand) | 235 mm |
|---|---|
| Height (with stand) | 587 mm |
| Weight (with stand) | 9700 g |
| Depth (without stand) | 79 mm |
| Width (without stand) | 894 mm |
| Height (without stand) | 525 mm |
| Weight (without stand) | 8600 g |
To Next Page
