SMART button to access the Smart
Home menu. Select Settings and press Wheel(OK).
Input List Settings Internet
Tv Guide
DVR
SmartSh
Universal...
More
More
User Guide Pr.List
Recent List
Settings
2 Select the NETWORK
→
Network Status menu.
My TV Name : 42LA6400-DA
Network Connection
Network Status
Wi-Fi Direct
MiracastTM/Intel's WiDi
NETWORK
Follow the instructions below that correlate to your
network status.
Check the TV or the AP(Router).
TV Gateway DNS Internet
Network Status
When an
appears on TV, but an X on Gateway.
1
Check the connection status of the TV, AP(Router)
and cable modem.
2
Power off and power on the TV, AP(Router) and
cable modem.
3
If you are using a static IP, enter the IP directly.
4
Contact internet companies or AP(Router)
companies.
Additional points to check when using a wireless
connection
1
Check the password for the wireless
connection in the AP(Router) settings window.
2
Change the AP(Router) SSID (network name)
or the wireless channel.
Premium Apps are pre-installed on the TV. These may vary by country.
1
Press the
SMART button to access the Smart
Home menu. Select Settings and press Wheel(OK).
Input List Settings Internet
Tv Guide
DVR
SmartSh
Universal...
More
More
User Guide Pr.List
Recent List
Settings
2
Select the NETWORK
→
Network Connection
menu.
Network Connection
Network Status
Wi-Fi Direct
MiracastTM/Intel's WiDi
NETWORK
My TV Name : 42LA6400-DA
3
Select the Start Connection.
To use network, prepare the following items.
Network Connection
To connect to a wired network:
Connect a LAN cable to the back of TV.
To connect to a wireless network:
Requires a wireless router or access point.
Start Connection
or
4 The device automatically tries to connect to the
network available (wired network first).
Cancel
Connecting to the network.
Network Connection
If you select Cancel or it fails to connect to the
network, the network list available is displayed.
Choose the network you wish to use.
Choose the network you want.
Wired Network
Wireless : AAA
Wireless : BBB
Wireless : CCC
Wireless : 11111
Wireless : 22222
Manual Setup
Refresh Lis
t
Network Connection
For wireless AP(Router) that have the
ꔒ
symbol, you
need to enter the security key.
Network Connection
Wireless : AAA
Forgot your password? Contact your AP manufacturer.
Enter security key of network.
5 The connected network is displayed.
Select Complete to confirm the network connection.
If you select the Other Network List, the available
network list is displayed again.
Network is connected.
Wireless:AAA
Select [Other Network List] to connect to another network.
Complete
Other Network List
Network Connection
Check the AP(Router) or consult your Internet
service provider.
TV Gateway DNS Internet
Network Status
When an appears on TV and Gateway, but an
X on DNS.
1
Unplug the power cord of the AP(Router), cable
modem and try to connect after 5 seconds.
2
Initialize(Reset) the AP(Router) or cable modem.
3
Con
tact internet companies or AP
(Router)
companies.
TV Gateway DNS Internet
Network Status
When an appears on TV, Gateway and DNS,
but an X on Internet.
1
Unplug the power cord of the AP(Router), cable
modem and try to connect after 5 seconds.
2
Initialize(Reset) the AP(Router) or cable modem.
3
Check that the MAC address of the TV/AP(Router)
is registered with your Internet service provider. (The
MAC address displayed on the right pane of the
network status window should be registered with
your Internet service provider.)
4
Check the AP(Router) manufacturer’s website
to make sure your router has the latest firmware
version installed.
Installation & Setting
DLNA Connection to PC
Install the SmartShare PC SW(DLNA) and SmartShare PC SW(MediaLink) program on your PC.
1 Go to www.lg.com. Then, select your region.
2 Select SUPPORT. Then, search for your model.
3 Select Drivers & Software or SOFTWARE UPDATE. Then, select SmartShare PC SW(DLNA)
4 You can run the program when installation is complete.
NOTE
DLNA service is only available if TV and other devices are connected via a single AP(Router).
wireless AP(Router)
SMART TV Quick Setup Guide
P/NO : MBM63822502 (1212-REV00)
Printed in Korea
a
b
1
Start Nero Kwick Media and enable shared folders on your PC.
»
a
: Click the Share button.
»
b
: Click the Add button and select the desired folder.
(Read the Owner's Manual to find out which file formats are
supported by the DLNA function.)
c
d
2 Make sure that the PC network device is selected.
»
c
: Click the Network button and check that the correct PC
network device is selected. (At least one network device must be
selected.)
»
d
: Click the Start Server button.
SMART SHARE
Settings
Connecting guide
Recent
Videos
Photos
Music
Recorded TV
Linked Device
e
3 You can view and enjoy shared content by using the TV’s Smart Share
function.
»
e
: Select the Linked device on the TV’s Smart Share Card to enjoy
content from your PC.
[PC Screen]
[PC Screen]
[TV Screen]
To Next Page
Need help?
General
Weight and Dimensions
