LG 42CQ610H - Auto Configure

30
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
1
MENU
Select PICTURE.
2
ENTER
Select Screen (RGB-PC).
3
ENTER
Select Auto config.
4
ENTER
Select Yes.
5
ENTER
Auto Configure
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, try using the manual settings or a different resolution or refresh rate on the PC.
• If the position of the image is still not
correct, try Auto adjustment again.
• If picture needs to be adjusted again after
Auto adjustment in RGB-PC, you can adjust
the Position, Size or Phase.
ὤ㨴㥄
SCREEN
ὤ㨴㥄
Move
ὤ㨴㥄
Prev.
Resolution
To Set
Yes No
Auto Config.
Position
Size
Phase
Reset
EnterMove
EnterMove

 
 
 
 


