PREPARATION
PREPARATION
26
STAND INSTRUCTIONS
(For
32LD320, 32/42/47LD420, 32/42/47/55LD520
)
ᯫ
Image shown may differ from your TV.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Assemble the TV as shown.
3
Install the 4 screws into the holes shown.
INSTALLATION
!
NOTE
When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
M4 x 20
To Next Page
Loading...
