LG 42LD465 - Page 25

25
PREPARATION
STAND INSTRUCTIONS (For 32/42LD420, 32/42LD420C )
ꔛ
Image shown may differ from your TV.
1
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
2
Assemble the TV as shown.
3
Install the 4 screws into the holes shown.
INSTALLATION
!
NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened
(If not tightened fully, the TV can tilt for-
ward after the product installation). Do not
over tighten.
M4 x 24
DETACHMENT
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER over the hole for the
stand.
Press the PROTECTION COVER into the TV until
you hear it click.
When installing the wall mounting bracket, use
the PROTECTION COVER.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Remove the screws that hold the stand on.
3
Detach the stand from TV.