July 2009 LCD DV 42LH40
62
Invisible Speaker System Overview (Tweeters)
Invisible Speaker System Overview (Tweeters)
Invisible Speaker has a
sticky surface which
adheres to front bezel.
Invisible Speaker Tweeter
shown separately. The Front (down)
has sticky surface which adheres to
front bezel. Note, there is no
diaphragm, only voice coil.
Outlined
Circle
Speaker
Attachment
post
Cabinet works as
a diaphragm.
2
nd
: Progression
Elimination of the
conventional
speaker.
The front bezel is shown below. Note: the outlined
circle is the location for the front sticky pad on the
Invisible Speaker. This prevent the coil from
bouncing off the plastic causing vibrations.
WARNING: Removing the Tweeter will
destroy the speaker as shown above.
The diaphragm/spider is glued to the
front bezel. When removing, it will tear.
Tweeter
p/n EAB58536001
To Next Page
Loading...
