To Next PageTo Next PageWhat to do if my LG LCD TV has no image and sound?
If your LG LCD TV isn't showing an image and there's no sound, first ensure the TV is actually powered on. Next, verify that the power cord is securely connected to both the TV and the wall outlet. Lastly, test the wall outlet by plugging in another device to confirm it's working correctly.
Why does my LG TV turn off suddenly?
If your LG TV turns off unexpectedly, it could be due to a few reasons. First, ensure that the power supply isn't interrupted and check the power control settings. Also, the Auto sleep feature in the Time settings might be enabled. Finally, the TV is designed to turn off automatically after 15 minutes of inactivity if no signal is detected.
How to fix LG TV remote control not working?
If you're unable to control your LG TV with the remote, try these steps: First, check the remote control sensor on the TV and try again. Ensure there are no obstructions between the remote and the TV. Finally, verify that the batteries in the remote are working and correctly installed, paying attention to the to , to orientation.
Why does my LG LED TV turn off by itself?
If your LG LED TV is turning off suddenly, there might be a few reasons: * Check the power control settings to ensure the power supply isn't being interrupted. * See if the Auto sleep feature is activated in the Time settings. * If the TV is on but not receiving a signal, it will automatically turn off after 15 minutes of inactivity.
How to fix LG LED TV remote control not working?
If you can't control your LG LED TV with the remote, try these steps: * Check the remote control sensor on the TV and try again. * Make sure there are no obstacles blocking the path between the remote and the TV. * Check the batteries in the remote to ensure they are working and correctly installed.
Why does my LG 42LM6200 LCD TV turn off by itself?
If your LG LCD TV is turning off unexpectedly, you should first check the power control settings to ensure the power supply isn't being interrupted. Also, verify that the Auto sleep feature is not enabled within the Time settings. Lastly, be aware that if the TV doesn't receive a signal for 15 minutes while it's on, it will automatically shut off.
How to fix an LG LCD TV remote that is not working?
If you're unable to control your LG LCD TV with the remote, start by checking the remote control sensor on the TV and try again. Make sure there are no obstructions between the remote and the TV. Also, ensure the batteries in the remote are working and correctly installed.
What to do if my LG 42LM6200 turns off suddenly?
If your LG LCD TV turns off suddenly, check the power control settings to ensure the power supply isn't interrupted. Also, verify if the Sleep Timer feature is activated in the Time settings. Note that the TV will turn off automatically after 15 minutes of inactivity if there is no signal while the TV is on.
What to do if LG LCD TV remote control is not working?
If you cannot control your LG LCD TV with the remote, first check the remote control sensor on the TV and try again. Ensure there are no obstacles between the remote and the TV. Finally, check if the batteries in the remote are working and properly installed.
What to do if my LG LED TV says 'No signal' when connecting to PC?
If your LG LED TV displays 'No signal' or 'Invalid Format' when connected to a PC via RGB/HDMI DVI, try the following: 1. Turn the TV off and on again using the remote control. 2. Reconnect the RGB/HDMI cable. 3. Restart your PC while the TV is on.
General| 3D | Yes |
|---|---|
| 3D type | Passive |
| 3D glasses quantity | 4 |
| Display diagonal | 42 \ |
| Native refresh rate | 50 Hz |
| LED backlighting type | Edge-LED |
| Supported video modes | 1080i, 1080p, 720p |
| Contrast ratio (dynamic) | 6000000:1 |
| Display diagonal (metric) | 107 cm |
| Screen format adjustments | 4:3, 16:9 |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Motion interpolation technology | TruMotion 100 Hz |
| Tuner type | Analog & digital |
| Analog signal format system | - |
| Digital signal format system | DVB-T |
| Audio system | Dolby Digital |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| DVI port | No |
| HDMI version | 1.4 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 3 |
| Component video (YPbPr/YCbCr) in | 1 |
| Consumer Electronics Control (CEC) | Anynet+ |
| Smart modes | Cinema, Game, Sports, Standard, Vivid |
| Lifestyle apps | Skype |
| On Screen Display (OSD) languages | ENG, ESP, FRE, KOR |
| Audio formats supported | MP3 |
| Image formats supported | JPG |
| Video formats supported | DIVX |
| Product color | Black |
| Panel mounting interface | 400 x 400 mm |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.1 W |
| Sustainability certificates | ENERGY STAR |
| Cables included | AC |
Weight and Dimensions| Depth (with stand) | 269 mm |
|---|---|
| Height (with stand) | 660 mm |
| Weight (with stand) | 15600 g |
| Depth (without stand) | 35.5 mm |
| Width (without stand) | 933 mm |
| Height (without stand) | 594 mm |
| Weight (without stand) | 13100 g |
