To set up the network settings,
1
Press
Home
to access the Home menu.
2
Press the Navigation buttons to scroll to
SETUP
and press
ENTER
.
3
Press the Navigation buttons to scroll to
NETWORK
and press
ENTER
.
4
Press the Navigation buttons to select
Network Setting
and press
ENTER
.
5
Press the Navigation buttons to select
Wireless
and press
ENTER
.
6
If you already set Network Setting, select
Resetting
and press
ENTER
.
The new connection settings resets the
current network settings.
7
Press the Navigation buttons to select
Setting
from the AP list
and press
ENTER
.
- Scan the all available AP (Access Point) or
wireless routers within range and display
them as a list.
8
Press the Navigation buttons to select an AP
(Access Point) or wireless router on the list. (If
your AP is secured, you will prompted for the
key.) And press
ENTER
.
9
Press the Number buttons to Input the security
key of AP and press
ENTER
.
When a security code is already
set
PIN (Personal Identification Number)
If your router is set to use a PIN, use the following
instructions.
1
Repeat step 1-7 on “Connecting to a wireless
network”.
2
Press the Red button to connect the access
point with
PIN
mode.
3
You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
PIN number is the unique 8 digit number of the
dongle.
4
Press
ENTER
to select
Connect
.
5
Repeat step 6-7 on “Connecting to a wired
network”.
50
ENG
ENGLISH
ENTERTAINMENT
To Next Page
Loading...
