To Next PageTo Next PageWhy does my LG 42PA4500 Plasma TV turn off suddenly?
If your LG Plasma TV suddenly turns off, first examine the power control settings to ensure the power supply isn't interrupted. Then, verify if the Auto sleep feature is enabled within the Time settings. Also, be aware that the TV will automatically shut down after 15 minutes of inactivity if no signal is detected while it's on.
How to fix LG 42PA4500 remote control not working?
If you cannot control your LG Plasma TV with the remote, start by checking the remote control sensor on the TV and try again. Ensure there are no obstacles blocking the path between the remote and the TV. Finally, verify that the batteries in the remote are working correctly and are properly installed, paying attention to the correct polarity (+ to -, + to -).
How to fix abnormal screen when using Pentouch on LG Plasma TV?
If the TV screen doesn’t look normal when using Pentouch with your LG Plasma TV, first verify that the computer is correctly connected to the TV. Then, check that you are using the optimal resolution. Finally, set the aspect ratio on the TV to Just Scan.
Why does the image appear slowly when my LG 42PA4500 turns on?
When you turn on your LG Plasma TV, the image may appear slowly because the image is muted during the product startup process, which is normal. However, if the image doesn't appear after a few minutes, unplug the TV for 30 seconds and then try again. If the image still does not appear, no answer.
How to fix LG 42PA4500 screen when using Pentouch?
To address a non-normal screen appearance when using Pentouch on your LG Plasma TV, first, verify that the computer is properly connected to the TV. Next, ensure that you are using the optimal resolution. Finally, set the aspect ratio on the TV to Just Scan.
Why my LG 42PA4500 has no image and sound?
If your LG Plasma TV shows no image and produces no sound, first ensure that the TV is turned on. Then, check whether the power cord is properly connected to the wall outlet. Finally, test the wall outlet by connecting other products to see if there's a problem with the outlet itself.
What to do if my LG Plasma TV turns off suddenly?
If your LG Plasma TV turns off suddenly, it might be due to an interruption in the power supply. Check the power control settings. Also, the Auto sleep feature in the Time settings might be activated. If there is no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.
Why does my LG 42PA4500 Plasma TV keep turning off?
If your LG Plasma TV turns off suddenly, check the power control settings to ensure the power supply isn't interrupted. Also, see if the Auto sleep feature is activated in the Time settings. If there's no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.
What to do if my LG 42PA4500 has no image and sound?
If your LG Plasma TV shows no image and produces no sound, first ensure that the TV is powered on. Next, check that the power cord is securely connected to a functioning wall outlet. To confirm the outlet's functionality, try plugging in other devices.
General| 3D | No |
|---|---|
| Depth | 58 mm |
| Width | 983.6 mm |
| Height | 601.3 mm |
| Weight | 19000 g |
| Tuner type | Analog & digital |
| Color depth | 16 bit |
| Pixel pitch | - mm |
| Smart modes | Cinema, Game, Standard, Vivid |
| Certification | RoHS UL |
| Product color | Black |
| Noise reduction | Yes |
| RMS rated power | 10 W |
| AC input voltage | 100 - 240 V |
| Display diagonal | 42 \ |
| AC input frequency | 50 - 60 Hz |
| Depth (with stand) | 246.7 mm |
| Display brightness | - cd/m² |
| Display resolution | 1024 x 768 pixels |
| Display technology | Plasma |
| Number of speakers | 2 |
| Height (with stand) | 655 mm |
| High frequency rate | 600 Hz |
| Weight (with stand) | 20600 g |
| Supported video modes | 1080i, 1080p, 480i, 480p, 720p |
| USB 2.0 ports quantity | 1 |
| S-Video inputs quantity | 0 |
| Contrast ratio (dynamic) | 3000000:1 |
| Contrast ratio (typical) | - |
| Equalizer bands quantity | 5 |
| Panel mounting interface | 400 x 400 mm |
| Annual energy consumption | 135.7 kWh |
| Screen format adjustments | 4:3, 14:9, 16:9 |
| Analog signal format system | NTSC |
| Digital signal format system | ATSC |
| Supported graphics resolutions | 1024 x 768 (XGA) |
Ensure proper grounding to prevent electric shock. Do not ground via telephone wires or gas pipes.
The mains plug is the disconnecting device and must remain operable.
Check product box for included items. Contact dealer for missing accessories.
Identifies and describes the TV's physical buttons and the intelligent sensor.
Step-by-step instructions for attaching the TV stand to the TV set.
Guides through selecting language, customizing basic settings, and initial setup.
How to store, set up, and edit channels automatically or manually.
Guides on automatic and manual channel tuning and editing.
Step-by-step guide to install the Pentouch program from the CD.
Explains the pairing process for the touch pen and dongle.
Step-by-step guide to pair the touch pen and dongle for initial use.
How to power on/off the pen, use the Touch Home button, and general usage.
How to connect PC, configure screen, and enter Pentouch mode.
How to connect USB devices for multimedia features.
How to play video files from a USB storage device.
How to view image files saved on a USB storage device.
How to play music files from a USB storage device.
Adjusts image size, quality, or effect using various options.
Selects preset image modes or customizes options for best TV performance.
Adjusts sound quality, effect, or volume level.
Sets up and edits channels, including auto and manual tuning.
Sets time, date, time zone, and timer features.
Locks channels, programs, or external inputs to prevent unauthorized use.
Customizes general settings like language and caption preferences.
Resets TV to factory default, erasing stored channels and settings.
Guides on connecting antennas, cables, or cable boxes for TV viewing.
How to connect these devices and select the appropriate input mode.
Explains HDMI as the best connection for digital video and audio.
Transmits digital video via DVI-HDMI cable, with instructions for audio connection.
Connects analog video and audio signals using component cables.
Connects analog video and audio signals using composite cables.
Recommends HDMI for best quality; discusses PC mode issues like noise.
Details three methods for connecting a PC: HDMI, DVI-HDMI, and RGB.
Connect external audio systems and set TV speaker feature to off.
Transmits digital audio via optical cable to external devices.
Connect USB storage for multimedia access via My Media menu.
Controls multimedia devices conveniently using the TV remote via HDMI-CEC.
Steps to activate SIMPLINK function and control connected AV devices.
Avoid displaying fixed images for long periods to prevent screen burn-in.
Addresses issues with remote control, no image/sound, slow image display, and sudden power off.
Solves problems related to no sound, sound from one speaker, and unusual internal sounds.
Addresses image issues like black and white display, bars, blur, afterimages, and no signal.
Solutions for touch pen not working, abnormal screen display, and incorrect touch positions.
