LG 42PC1D Service Manual

- 9 -
STAND INSTALLATION (OPTION)
Figures shown here may be slightly different from your set.
When closing the stand for storage
First remove the screws in the holes (B) on the bottom
of the stand. And then pull two Hooks (D) of the stand
bottom
and fold the stand into the back of the set.
After folding, push two Locks (A) of the stand bottom
outward.
O Place the set with the screen facing down on a cushion or soft cloth as shown in Figures 1.
Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward.
O Pull the stand out as shown above in Figures 2 ~ 3.
After unfolding the stand, please insert and tighten the screws in the holes (B) on the bottom of the
stand.
O When connecting cables to the set, Do not disengage the lock (C).
This may cause the set to fall, causing serious bodily injury and serious damage to the set.
A
D
A
C
B
B
1
3 4
2
* NOTE

LG 42PC1D Specifications

General

Depth	98.5 mm
Height	695 mm
Weight	30000 g
Comb filter	3D
Pixel pitch	- mm
Power supply	250 W
Product color	Black, Silver
Audio (L/R) in	1
Display diagonal	42 \
Sound output mode	6
Depth (with stand)	380 mm
Display brightness	1200 cd/m²
Display resolution	1024 x 768 pixels
Display technology	Plasma
Power requirements	100-240V, 50/60Hz
Width (with stand)	1129 mm
Height (with stand)	748.5 mm
SCART ports quantity	3
USB 2.0 ports quantity	No
Viewable size diagonal	107 mm
Contrast ratio (typical)	-
Viewing angle, horizontal	160 °
Analog signal format system	NTSC, PAL, SECAM
Power consumption (standby)	1 W