58
Plasma Fall 2008 42PG20
Observing (Capturing) the Y
Observing (Capturing) the Y
-
-
Drive Signal for
Drive Signal for
Vsetdn
Vsetdn
(Ramp
(Ramp
-
-
Down)
Down)
Fig 1 Top: As an example of how to lock in to the
Y-Drive Waveform. Figure 1 top shows the signal
locked in at 4ms per/div.
The outlined signal for Vsetdn is outlined within the
Waveform
Fig 1 Top: At 2ms per/div. the outlined signal for Vsetdn is
now easier to recognize. It is outlined within the Waveform
Fig 1 Top: At 1ms per/div. the outlined signal for Vsetdn is
now clearly visible. It is outlined within the Waveform
Fig 1 Lower: At 40uSec per/division, the
adjustment for Vsetdn can be made.
Fig 1 Lower: At 100uSec per/division, the waveform
to use for Vsetdn Is now isolated.
Fig 1 Lower: At 400uSec per/division, the waveform
to use for Vsetdn Is now isolated.
FIG1
FIG2
FIG3
Area to
be adjusted
Area to
be adjusted
Area to be adjusted
Zoomed out
Outlined
Area